Tag: temperature

Posted on

Regie-40

icon-support-regie40

icon-support-regie40

Support for Regie-40 hand-held data logger, portable recording system.
(no longer produced)

The printing of a graph constantly stops with error message.

In the event of a SENSOR-ERROR messages in graph (see the SE line under the measurement value graph) the printing of graphs is blocked.
This message can arise with:
a. Defective sensor or incorrectly connected.
b. No measurement signal is connected to the input.
First resolve these Sensor-Error messages through:

a. Replace defective sensors or connect properly
b. Set unconnected inputs to function OFF in window REGIE-40 – Change Parameters.

Then delete the Regie-40 and start up a new measurement period.
The data can now be printed out, if there are no longer any Sensor Error messages.
Comments: the data can however be requested in the Table display. 

Downloads

-installation package read out software v1.62NL

-read out/setting software manual v1.62NL

Posted on

Regiemaster-280

icon-rm280-data logger

icon-rm280-data logger

-REMARK: This product is out of produktion-    
this page is for reference only

Digital recorder for the encoded internal storage of a maximum of 8 measurement inputs. Via the built-in adjustable alarm contacts the measurement values can also be monitored. The saved measurement values and process recordings can then be shown or printed as graph or in table form.

DESCRIPTION

The Regiemaster data logger is an 8-channel digital recorder that independently and automatically saves the measurement values in the internal memory, after which they can be viewed via a computer in table form or graph. The data logger also has two alarm contacts with which various adjustable monitoring functions can be realised.  The saved measurement values can be transferred to the computer via an RS232 connection or a CompactFlash memory card. All settings can be modified via the computer or on the unit itself. As the measurement data is stored encoded it cannot be changed afterwards and so can function as evidence.

SPECIFICATIONS
Types Regiemaster-280: Digital 8 channels measurement values recorder.
Description Data logger with 8 identical measurement channels. Each channel can be set individually if required. See supplements. Housing 144x72mm for panel installation according to DIN43700. LCD display 2×16 characters with background lighting. RS232 connection for communication with computer. RS485 bus for connecting several Regiemasters. Relay contacts N.O. for Alarm functions and Sensor Error. The RM280 is supplied complete with mounting and connection components, power module 230V-24Vdc, DIN-rail connector block for connecting measurement signals, RS232 cable. Software for reading out and displaying measurement values and setting parameters.Software suitable for MS-Windows 95/98/2000/XP. All connections with screw/insert connectors. Delivered including connection and mounting materials.
Possible applications
  • Process monitoring/control.
  • HACCP control.
  • Registering Cooling transport.
  • Controling temp/%RH in homes.
Measurement system As requested with order: PT100 – IEC60751/3-lead Voltage or current inputs.
Measurement range Available in various types of measurement inputs, standard 8 identical input ranges. These can be modified per channel with a certain range:

  • PT100 range e.g. -50.0…+50.0°C, 0.0…200.0°C, -50…+350 °C.
  • 4-20 mA range 0…100%, display range freely adjustable.
  • 0-10 Vdc range 0…100%, display range freely adjustable.
Outputs Two relay contacts, potential-free contact N.O., max. 3 Amp @ 250VAC.
Power 24VDC connection supplied standard with power module for connection to 230VAC
Accuracy ± 1% FSR
IP-norm IP54 (front/panel side)
Dimensions Panel installation 144×96, depth 110 mm.
Options (for supplement)
  • Conversion to another measurement range, supplement per measurement input.
  • Memory card Compact-flash 32MB (incl. adapter).
  • RS232 serial cable length 2 metres.
  • Plug connecting to two RM280 data loggers.
  • Cable for connecting several data loggers via the RS485 bus, length 2 metres.
  • DCF-atomic clock receiver, which synchronises the internal clock of the data logger for applications whereby accurate time registration is important.
  • Front with transparent and lockable door.
  • USB-PCMCIA-reader for reading out the memory cards on a PC.
  • Set Line drivers for extending RS232 communication to approx. 200 metres (Excluding cable. This can be supplied at any length).
  • Regiemaster read out software with extension for automatic reading out via the computer at preset times.
  • Installed in switch box or housing for wall mounting.
  • Installed in transportable case with battery.
DOCUMENTATION

• Brochure

• Regiemaster280 Manual
• RM280 Software Manual
• Connection diagram connector block

• RM280 control software Dutch version [download]
REMARK: This software is designed for Windows 98/Vista/XP only.
We cannot guarantee proper operation in newer versions Windows-7 and above.

ORDERING

The delivery of standard types from stocks and customer-specific versions can be within a few days. In view of the large number of models and options for orders you can contact our sales department< tel. +31 50-501 37 45 or by email:
sales@rstechnics.nl

Posted on

LC06 OEM thermostat

icon-lc06-thermostat

icon-lc06-thermostat

Compact OEM thermostat with internal set point trimmer, permanent switch differential and high power relay contact max. 15 Amp. @ 230VAC.

DESCRIPTION

The LC-thermostat series are compact professional thermostats for regulating temperature in cooling and heating technology for a large number of applications. The measurement is based on the highly stable and accurate PT100 sensor. Various standard versions, ranges and housings are available for the various applications. We can of course provide you with comprehensive advice regarding suitable sensors. In addition to the standard versions it is possible to supply a thermostat in a customer-specific range or version. Attractive discounts apply to larger series.

SPECIFICATIONS
Types LC06: OEM Thermostat with internal set point-trimmer, indicate range.
Description Compact thermostat in flat steel housing, connection via 6,3mm Fastons. Internal set point-trimmer, specially developed, for example, coffee machines. Supplied whit mounted cable sensor model 156, pocket 50×6 mm, with 2 metre PVC cable.
Possible applications
  • Industrial applications.
  • Process control.
  • Machine construction.
  • Coffee machines.
  • Frost protection.
  • Cool/Freeze display cases.
Measurement system PT100 – IEC60751-3 lead.
Measurement range Standard measurement ranges: 70…100°C, 0…100° or 0…200°C. Other ranges possible upon request. Permanent switch differential: ±1% FSR.
Outputs high power relay contact max. 15 Amp. @ 230V AC.
Power Standard 230 VAC – 50/60 Hz, optional in 24 VDC (ask for the suitable versions).
Accuracy ± 1°C.
IP-norm IP44.
Dimensions –
Options (for supplement)
  • Customer-specific / non-standard measurement range.
  • Customer-specific / non-standard supply voltage.
  • Front plate with own logo, company name or measurement unit.
DOCUMENTATION

• Brochure
• Example switch functions (Dutch)
• Examples switching functions (English)

ORDERING

The delivery of standard types from stocks and customer-specific versions can be within a few days. In view of the large number of versions and options for orders you can contact our sales department tel. +31 50-501 37 45 or by email:
sales@rstechnics.nl

Posted on

TS20 Switch module dual

icon-ts20-switch module

icon-ts20-switch module

Switch module for process monitoring with independent adjustable switching points and 4…20 mA retransmission output signal.

DESCRIPTION

The TS-modules are professional switch modules intended, for example, for the local monitoring of part of a process. These modules are suitable for mounting on standard DIN rails, and are available with one or two independent switching points. The switching point can be set by using the rotary knob on the front, is this point exceeded a relay contact is switched. In addition, the input signal is converted to a 4…20 mA retransmission output signal, intended e.g. for controlling a PLC, indicator or recorder.
Optionally the TS module can be supplied in a “tropical seal” version. Hereby, the internal electronics are protected by a urethane seal against a higher air humidity, for example for use in the shipping industry.

SPECIFICATIONS
Types TS20: Switch module with two independent adjustable switching points.
Description Switch module for process monitoring with two adjustable switching points and 4…20 mA retransmission output signal. Plastic housing for DIN rail mounting.
Possible applications
  • Industrial applications.
  • Process control.
  • Shipping.
  • Machine construction.
Measurement system PT100 – IEC60751-3 lead.
Measurement range Measurement range 0…100 °C or 0…200°C, request with order. Adjustable switch differential: ±1-10% FSR.
Outputs
  • 2 Relays with make-and-break contact max. 3 Amp @ 250 VAC
  • Switch function: Cooling or Heating, request with order.
  • 4…20 mA retransmission output signal, follows the measured input value.
Power Standard 230VAC – 50/60Hz, optional in 24VDC
Accuracy ± 1°C
IP-norm IP54
Dimensions –
Options (for supplement)
  • Customer-specific / non standard measurement. This can be with PT100 temperature ranges or Current/Voltage input.
  • Customer-specific/ non standard supply voltage.
  • “Tropical Seal” version.
  • Front plate with own logo, company name or measurement unit.
DOCUMENTATION

• Brochure
• Manual
• Connection diagram

ORDERING

The delivery of standard types from stocks and customer-specific versions can be within a few days. In view of the large number of versions and options for orders you can contact our sales department tel. +31 50-501 37 45 or by email:
sales@rstechnics.nl

Posted on

TS20 Switch module dual

icon-ts20-switch module

icon-ts20-switch module

Switch module for process monitoring with independent adjustable switching points and 4…20 mA retransmission output signal.

DESCRIPTION

The TS-modules are professional switch modules intended, for example, for the local monitoring of part of a process. These modules are suitable for mounting on standard DIN rails, and are available with one or two independent switching points. The switching point can be set by using the rotary knob on the front, is this point exceeded a relay contact is switched. In addition, the input signal is converted to a 4…20 mA retransmission output signal, intended e.g. for controlling a PLC, indicator or recorder.
Optionally the TS module can be supplied in a “tropical seal” version. Hereby, the internal electronics are protected by a urethane seal against a higher air humidity, for example for use in the shipping industry.

SPECIFICATIONS
Types TS20: Switch module with two independent adjustable switching points.
Description Switch module for process monitoring with two adjustable switching points and 4…20 mA retransmission output signal. Plastic housing for DIN rail mounting.
Possible applications
  • Industrial applications.
  • Process control.
  • Shipping.
  • Machine construction.
Measurement system PT100 – IEC60751-3 lead.
Measurement range Measurement range 0…100 °C or 0…200°C, request with order. Adjustable switch differential: ±1-10% FSR.
Outputs
  • 2 Relays with make-and-break contact max. 3 Amp @ 250 VAC
  • Switch function: Cooling or Heating, request with order.
  • 4…20 mA retransmission output signal, follows the measured input value.
Power Standard 230VAC – 50/60Hz, optional in 24VDC
Accuracy ± 1°C
IP-norm IP54
Dimensions –
Options (for supplement)
  • Customer-specific / non standard measurement. This can be with PT100 temperature ranges or Current/Voltage input.
  • Customer-specific/ non standard supply voltage.
  • “Tropical Seal” version.
  • Front plate with own logo, company name or measurement unit.
DOCUMENTATION

• Brochure
• Manual
• Connection diagram

ORDERING

The delivery of standard types from stocks and customer-specific versions can be within a few days. In view of the large number of versions and options for orders you can contact our sales department tel. +31 50-501 37 45 or by email:
sales@rstechnics.nl

Posted on

TS10 Switch module single

icon-ts10-switch module

icon-ts10-switch module

Switch module for process monitoring with one adjustable switching point and 4…20 mA retransmission output signal.

DESCRIPTION

The TS-modules are professional switch modules intended, for example, for the local monitoring of part of a process. These modules are suitable for mounting on standard DIN rails, and are available with one or two independent switching points. The switching point can be set by using the rotary knob on the front, is this point exceeded a relay contact is switched. In addition, the input signal is converted to a 4…20 mA retransmission output signal, intended e.g. for controlling a PLC, indicator or recorder.
Optionally the TS module can be supplied in a “tropical seal” version. Hereby, the internal electronics are protected by a urethane seal against a higher air humidity, for example for use in the shipping industry.

SPECIFICATIONS
Types TS10: Switch module with one independent adjustable switch point.
Description Switch module for process monitoring with adjustable switch point and 4…20 mA retransmission output signal. Plastic housing for DIN rail mounting.
Possible applications
  • Industrial applications.
  • Process control.
  • Shipping.
  • Machine construction.
Measurement system PT100 – IEC60751-3 lead.
Measurement range Measurement range 0…100 °C or 0…200°C, requested with order. Adjustable switch differential: ±1-10% FSR.
Outputs
  • 1 Relay make-and-break contact max. 3 Amp @ 250 VAC.
  • Switch function: Cooling or Heating, requested with order.
  • 4…20 mA retransmission output signal, follows the measured input value.
Power Standard 230VAC – 50/60 Hz. Optional in 115VAC or 24Vdc
Accuracy ± 1°C
IP-norm IP54
Dimensions –
Options (for supplement)
  • Customer-specific / non standard measurement range. This can be with PT100 temperature ranges or Current/Voltage input.
  • Customer-specific/ non standard supply voltage.
  • “Tropical Sealed” version.
  • Front plate with own logo, company name or measurement unit.
DOCUMENTATION

• Brochure
• Manual
• Connection diagram

ORDERING

The delivery of standard types from stocks and customer-specific versions can be within a few days. In view of the large number of versions and options for orders you can contact our sales department tel. +31 50-501 37 45 or by email:
sales@rstechnics.nl

Posted on

TS10 Switch module single

icon-ts10-switch module

icon-ts10-switch module

Switch module for process monitoring with one adjustable switching point and 4…20 mA retransmission output signal.

DESCRIPTION

The TS-modules are professional switch modules intended, for example, for the local monitoring of part of a process. These modules are suitable for mounting on standard DIN rails, and are available with one or two independent switching points. The switching point can be set by using the rotary knob on the front, is this point exceeded a relay contact is switched. In addition, the input signal is converted to a 4…20 mA retransmission output signal, intended e.g. for controlling a PLC, indicator or recorder.
Optionally the TS module can be supplied in a “tropical seal” version. Hereby, the internal electronics are protected by a urethane seal against a higher air humidity, for example for use in the shipping industry.

SPECIFICATIONS
Types TS10: Switch module with one independent adjustable switch point.
Description Switch module for process monitoring with adjustable switch point and 4…20 mA retransmission output signal. Plastic housing for DIN rail mounting.
Possible applications
  • Industrial applications.
  • Process control.
  • Shipping.
  • Machine construction.
Measurement system PT100 – IEC60751-3 lead.
Measurement range Measurement range 0…100 °C or 0…200°C, requested with order. Adjustable switch differential: ±1-10% FSR.
Outputs
  • 1 Relay make-and-break contact max. 3 Amp @ 250 VAC.
  • Switch function: Cooling or Heating, requested with order.
  • 4…20 mA retransmission output signal, follows the measured input value.
Power Standard 230VAC – 50/60 Hz. Optional in 115VAC or 24Vdc
Accuracy ± 1°C
IP-norm IP54
Dimensions –
Options (for supplement)
  • Customer-specific / non standard measurement range. This can be with PT100 temperature ranges or Current/Voltage input.
  • Customer-specific/ non standard supply voltage.
  • “Tropical Sealed” version.
  • Front plate with own logo, company name or measurement unit.
DOCUMENTATION

• Brochure
• Manual
• Connection diagram

ORDERING

The delivery of standard types from stocks and customer-specific versions can be within a few days. In view of the large number of versions and options for orders you can contact our sales department tel. +31 50-501 37 45 or by email:
sales@rstechnics.nl

Posted on

TM16 – Temperature Monitor for 16 channels

icon-tm16-temperature-monitor

icon-tm16-temperature-monitor

The TempMonitor-16 is the solution for displaying and monitoring a maximum of 16 measurement signals on 1 central display unit. By means of the push buttons the desired measurement value can be shown on the display, and the settings for the monitoring contact can be changed.

DESCRIPTION

The TempMonitor-16 is a compact monitor unit specially developed for simultaneously monitoring a maximum of 16 measurement signals. The TempMonitor-16 has two alarm contacts. The alarm function can be set separately for each measurement channel. By means of the LCD display and the push buttons on the front the measurement value of each channel can be displayed. If an alarm is given the measurement value of the channel in question is automatically displayed and a notification follows with the Relay contact and indication via LED and internal acoustic Buzzer. Fail-safe alarm contact with detection of sensor faults. This unit is intended for panel installation.

SPECIFICATIONS
Types TM16: Temperatur Monitor with 16 inputs.
Description Programmable 16-channel temperature monitor in housing for panel installation NG144x72mm. LCD-display 2×16 characters with background lighting. 2 Alarm relay max. 3 Amp @ 250 VAC. All connections with screw/insert connectors. Supplied including connection and mounting materials.
Possible applications
  • Industrial applications.
  • Process control.
  • Shipping.
  • Machine construction.
Measurement system As requested with order:

  • PT100 – IEC60751/3-lead
  • Thermocouple J or K
  • Voltage 0-10VDC
  • Current 4-20 mA
Measurement range Available measuring inputs, all 16 channels are in the same range:

  • PT100: -50…+200 °C and 0…600 °C.
  • Thermocouple-J: 0…500 °C.
  • Thermocouple-K: 0…1200 °C.
  • Current: 0…100 °C, Display range adjustable.
  • Voltage: 0…100 °C, Display range adjustable
Outputs Two relay contacts, potential-free contact N.O., max. 3 Amp @ 250 VAC.
Power Standard 230 VAC – 50/60 Hz, optional in 24 VDC.
Accuracy ± 1% FSR.
IP-norm IP54 (front/panel side).
Dimensions Panel installation 144×72, depth 110 mm.
Options (for supplement)
  • Front plate with own logo, company name or measurement unit
  • Installed in a cabinet or housing for wall mounting
DOCUMENTATION

• Brochure
• Manual and connection diagram

ORDERING

The delivery of standard types from stocks and customer-specific versions can be within a few days.In view of the large number of versions and options for orders you can contact our sales department tel. +31 50-501 37 45 or by email:
sales@rstechnics.nl

Posted on

SI96 – Indicator

icon-si96-indicator

icon-si96-indicator

Standard digital indicators for displaying temperature and process values. Panel installation, available in many standard or customer-specific measurement ranges.

DESCRIPTION

The SI-indicators are standard digital indicators for direct display of process values.  The indicator is supplied in a DIN housing for panel installation 96×48 mm (SI96), including mounting and connection components. Standard with a red LED display, a green one is optional. Due to the internal universal input card a large number of input ranges are possible. The indicators can also be supplied completely installed in a cabinet, eventual with connection clamps and wiring.

SPECIFICATIONS
Types SI96: indicator panel installation 96×48 mm, display character height 13 mm.
Description Process indicator in DIN housing for panel installation. Measurement input with standard range or according to specification. Standard with a red LED display, 3.5 digit and character height 13 mm. A LED display in green colour is optional. Supplied incl. mounting brackets and connection components.
Possible applications
  • Industrial applications.
  • Process control.
  • Shipping.
  • Machine construction.
Measurement system As requested with order:

  • PT100 – IEC60751/3-lead
  • Thermocouple J or K
  • Voltage 0-1 VDC or 0-10 VDC
  • Current 0-20 mA or 4-20 mA.
Measurement range
  • PT100: -50… +199°C
  • Thermocouple: 0-500°C
  • Current/Voltage: 0.0 … 100.0%
  • Other ranges possible on request.
Outputs –
Power Standard 230 VAC – 50/60 Hz, optional in 12 V or 24 V AC / DC.
Accuracy ± 1% FSR.
IP-norm IP54 (front/panel side).
Dimensions Panel installation 96x48mm, depth 65 mm.
Options (for supplement)
  • Customer-specific / non standard measurement range.
  • Customer-specific / non standard supply voltage.
  • Display LEDs in green.
  • Front plate with own logo, company name or measurement unit.
DOCUMENTATION

• Brochure
• Manual and connection diagram

ORDERING

The delivery of standard types from stocks and customer-specific versions can be within a few days. In view of the large number of versions and options for orders you can contact our sales department tel. +31 50-501 37 45 or by email:
sales@rstechnics.nl

Posted on

SI48 – Indicator

icon-si48-indicator

icon-si48-indicator

Standard digital indicators for displaying temperature and process values. Panel installation, available in many standard or customer-specific measurement ranges.

DESCRIPTION

The SI-indicators are standard digital indicators for direct display of process values. The indicator is supplied in a DIN housing for panel installation 48×48 (SI48), including mounting and connection components. Standard with a red LED display, a green one is optional. Due to the internal universal input card a large number of input ranges are possible. The indicators can also be supplied completely installed in a cabinet, eventual with connection clamps and wiring.

SPECIFICATIONS
Types SI48: indicator panel installation 48×48 mm, display character height 10 mm.
Description Process indicator in DIN housing for panel installation. Measurement input with standard range or according to specification. Standard with a red LED display, 3.5 digit and character height 10 mm. A LED display in green colour is optional. Supplied incl. mounting brackets and connection components.
Possible applications
  • Industrial applications.
  • Process control.
  • Shipping.
  • Machine construction.
Measurement system As requested with order:

  • PT100 – IEC60751/3-lead
  • Thermocouple J or K
  • Voltage 0-1 VDC or 0-10 VDC
  • Current 0-20 mA or 4-20 mA.
Measurement range
  • PT100: -50… +199°C
  • Thermocouple: 0-500°C
  • Current/Voltage: 0.0 … 100.0%.
  • Other ranges possible on request.
Outputs –
Power Standard 230 VAC – 50/60 Hz, optional in 12 V or 24 V AC / DC.
Accuracy ± 1% FSR.
IP-norm IP54 (front/panel side).
Dimensions Panel installation 48x48mm, depth 110 mm.
Options (for supplement)
  • Customer-specific / non standard measurement range.
  • Customer-specific / non standard supply voltage.
  • Display LEDs in green.
  • Front plate with own logo, company name or measurement unit.
DOCUMENTATION

• Brochure
• Manual and connection diagram

ORDERING

The delivery of standard types from stocks and customer-specific versions can be within a few days. In view of the large number of versions and options for orders you can contact our sales department tel. +31 50-501 37 45 or by email:
sales@rstechnics.nl