Tag: sensor

Posted on

DTM75 – Industrial handthermometer – incl. traceable calibration certificate

dtm75 bew cert

dtm75 bew cert

Robust, watertight and very accurate digital hand-held thermometer for industrial use during calibration and control tasks. The meter is fitted with a traceable calibration certificate and has an accuracy over the entire measurement range of  ±0.2°C. Standard with a 5 year guarantee!

DESCRIPTION

The DTM75 is a sturdy hand-held thermometer with a robust and watertight aluminium housing. It is manufactured from reliable, modern components so that it has standard a 5 year factory guarantee! With a standard 9-Volt battery more than 10,000 measurements are possible. In order to preserve battery life the meter switches off automatically after a few minutes. The DTM75 is supplied including a traceable calibration certificate that can be checked and renewed annually. 

SPECIFICATIONS
Types DTM75: Robust Precision thermometer incl. sensor and traceable calibration certificate, range -59.9..+199.9°C.

Sensor of your choice:

  • Hand-held sensor with rounded flat point and with 1 meter curled cable.
  • Hand-held sensor with rounded flat point and with 1 meter straight cable.
  • Hand-held sensor with sharp bullet-shaped point and with 1 meter curled cable.
  • Hand-held sensor with sharp bullet-shaped point and with 1 meter straight cable.
  • Hand-held sensor for air temperature measurement and with 1 meter curled cable.
  • Hand-held sensor for surface temperature measurement and with 1 meter curled cable.
  • Hand-held sensor with thinned sharp bullet-shaped point, cable bending protection and with 1 meter straight cable.
Description Robust watertight digital precision thermometer with 5 year guarantee!
Robust and watertight aluminium housing.
Possible applications
  • Industrial applications.
  • Calibration and Certification.
  • HACCP control.
  • Service tasks.
Measurement system PT100 – IEC60751/3-lead.
Measurement range Standard -59.9… +199.9°C. Customer-specific range possible.
Outputs –
Power 9V battery.
Accuracy ± 0.2°C.
IP-norm IP68.
Dimensions –
Options (for supplement)
  • Test lead for checking existing PT100 elements.
  • Sturdy plastic case with space for instrument and sensor.
  • Calibration plug for checking the instrument at 0 °C.
  • Calibration plug for checking the instrument at 100 °C.
  • (annual) Re-calibration of the instrument including new calibration certificate.
DOCUMENTATION

• Brochure
• Manual

ORDERING

The delivery of standard types from stocks and customer-specific versions can be within a few days.In view of the large number of versions and options for orders you can contact our sales department tel. +31 50-501 37 45 or by email:
sales@rstechnics.nl

Posted on

DTM70 – Industrial handthermometer – incl. traceable calibration certificate

dtm70 bew cert

dtm70 bew cert

Watertight and very accurate digital hand-held thermometer in seawater-proof plastic housing for use in the general or foodstuffs industry for calibration and control activities. The meter is fitted with a traceable calibration certificate and has an accuracy over the entire measurement range of ±0.2°C. Standard with a 5 year guarantee!

DESCRIPTION

The DTM70 is a sturdy watertight hand-held thermometer with a robust and seawater-proof plastic housing. It is manufactured from reliable, modern components so that it has standard a 5 year factory guarantee! With a standard 9-Volt battery more than 10,000 measurements are possible. In order to preserve battery life the meter switches off automatically after a few minutes. The DTM70 is supplied including a traceable calibration certificate that can be checked and renewed annually.  This meter is identical to the DTM75 industrial thermometer, which comes in an even more robust aluminium housing.

SPECIFICATIONS
Types DTM70: Robust Precision thermometer incl. sensor and traceable calibration certificate, range -59.9..+199.9°C.

Sensor of your choice:

  • Hand-held sensor with rounded flat point and with 1 meter curled cable.
  • Hand-held sensor with rounded flat point and with 1 meter straight cable.
  • Hand-held sensor with sharp bullet-shaped point and with 1 meter curled cable.
  • Hand-held sensor with sharp bullet-shaped point and with 1 meter straight cable.
  • Hand-held sensor for air temperature measurement and with 1 meter curled cable.
  • Hand-held sensor for surface temperature measurement and with 1 meter curled cable.
  • Hand-held sensor with thinned sharp bullet-shaped point, cable bending protection and with 1 meter straight cable.
Description Robust watertight digital precision thermometer with 5 year guarantee! Watertight plastic housing, seawater-proof. 
Possible applications
  • Industrial applications.
  • Calibration and Certification.
  • HACCP control.
  • Service tasks.
Measurement system PT100 – IEC60751/3-lead.
Measurement range Standard -59.9… +199.9°C. Customer-specific range possible.
Outputs –
Power 9V battery.
Accuracy ± 0.2°C.
IP-norm IP68.
Dimensions –
Options (for supplement)
  • Sturdy plastic case with space for instrument and sensor.
  • (annual) Re-calibration of the instrument including new calibration certificate.
DOCUMENTATION

• Brochure
• Manual

ORDERING

The delivery of standard types from stocks and customer-specific versions can be within a few days. In view of the large number of versions and options for orders you can contact our sales department tel. +31 50-501 37 45 or by email:
sales@rstechnics.nl

Posted on

DTM55 – Precision handthermometer – incl. traceable calibration certificate

dtm55 bew cert

dtm55 bew cert

Very accurate digital hand-held thermometer for calibration and control tasks including traceable calibration certificate. Accuracy over the entire measurement range ±0.2°C. Standard with a 5 year guarantee!

DESCRIPTION

The DTM55 is a very accurate hand-held thermometer for all the usual calibration and control tasks. This meter is a robust version manufactured from modern electronic components, which gives it a standard 5 year factory guarantee! With a standard 9 volt battery more than 10,000 measurements are possible. In order to preserve battery life the meter switches off automatically after several minutes. The DTM55 is supplied including a traceable calibration certificate that can be checked and renewed annually.

NEW: the DTM55 is now also available in a version that measures Cryogenic temperatures in for example liquid nitrogen. Specially developed for laboratories, blood banks, hospitals, AI stations etc. Delivery including traceable calibration certificate (to -20°C) and hand-held sensor according to choice. Can be used for a temperature range from -190 to +50 °C.

SPECIFICATIONS
Types
  • DTM55: Precision hand-held thermometer incl. sensor and traceable calibration certificate, range -59.9..+199.9°C.
  • DTM55CRYO: Precision hand-held thermometer incl. sensor and traceable calibration certificate, range -190.0..+50.0°C.

Sensor of your choice:

  • Hand-held sensor with rounded flat point and with 1 meter curled cable.
  • Hand-held sensor with rounded flat point and with 1 meter straight cable.
  • Hand-held sensor with sharp bullet-shaped point and with 1 meter curled cable.
  • Hand-held sensor with sharp bullet-shaped point and with 1 meter straight cable.
  • Hand-held sensor for air temperature measurement and with 1 meter curled cable.
  • Hand-held sensor for surface temperature measurement and with 1 meter curled cable.
  • Hand-held sensor with thinned sharp bullet-shaped point, cable bending protection and with 1 meter straight cable.
Description Digital precision thermometer with 5 year guarantee! 
Possible applications
  • Calibration and Certification.
  • HACCP control.
  • Service tasks.
Measurement system PT100 – IEC60751/3-lead.
Measurement range Standard -59.9… +199.9°C. Customer-specific range possible.
Outputs –
Power 9V battery.
Accuracy DTM55: ± 0.2°C. DTM55CRYO: ± 0.5°C.
IP-norm IP52.
Dimensions –
Options (for supplement)
  • Test lead for checking existing PT100 elements.
  • Sturdy plastic case with space for instrument and sensor.
  • Calibration plug for checking the instrument at 0 °C.
  • Calibration plug for checking the instrument at 100 °C.
  • (annual) Re-calibration of the instrument including new calibration certificate.
DOCUMENTATION

• Brochure
• Manual (Dutch)
• User manual (English)

ORDERING

The delivery of standard types from stocks and customer-specific versions can be within a few days. In view of the large number of versions and options for orders you can contact our sales department tel. +31 50-501 37 45 or by email:
sales@rstechnics.nl

Posted on

700S series – Vibration resistant robust solid stainless steel sensor

700s-701s-702s-vibration-resistant

700s-701s-702s-vibration-resistant

Specially designed for shipping and heavy industry. Vibration-resistant temperature sensor with 100% watertight, stainless steel connection head, resistant to extreme stresses. Custom-made with swivel or nipple process connection and a Lloyd’s approval.

DESCRIPTION

Vibration-resistant sensor, resistant to extreme stresses such as ship diesel engines or heavy industry! The 700 series comes with a connection head turned from solid material and has a screw cap with O-ring seal. It is vibration-resistant according to Lloyd’s ref.01/30008(E3). This highly robust and 100% watertight (IP68) sensor has a process connection according to customer specifications and can be fitted with a 2-wire transmitter type TRM33A.

SPECIFICATIONS
  • temperatuursensor-700S type 700S
  • temperatuursensor-701S type 701S
  • temperatuursensor-702S type 702S
  • Lloyds type approvalLloyd’s approval
Types
  • 700S: Stainless steel vibration-resistant sensorswivel nut with internal thread.
  • 701S: Vibration-resistant stainless steel sensor, nipple with external thread.
  • 702S: Stainless steel vibration-resistant sensor without process connection.

Length, diameter, and measurement system as requested with order.
Possible applications
  • Heavy industrial applications.
  • Foodstuffs industry.
  • Strongly corrosive environments.
  • Shipping / Offshore.
Measurement element
  • PT100
  • PT200
  • PT500
  • PT1000
  • Ni100
  • Ni1000
  • Thermocouple J or K.
Measurement system
  • Single version
  • Duplex version
  • 2, 3 or 4-lead technology.
Temperature range Standard range to a maximum of 300 °C. 
Also suitable for high temperature measurements. 
This is however very much dependent upon the chosen materials, connection cables and construction.
For the correct version, please feel free to contact us.
Materials
  • Fully in Stainless steel-316.
  • Seal in screw cap with O-ring, material Viton
Dimensions As requested with order
Process connection Refer to type numbers for the desired version, including BSP, NPT screw thread.
Connection cable Screw connection in the connection head, so supplied without cable.
IP-norm  IP-65.
Options 
(for supplement) 
  • Duplex version.
  • Head transmitter TRM33A, measurement range as requested.
  • Measurement system PT100 1/3 Din selection.
  • Measurement system PT100 1/5 Din selection.
  • Measurement system PT100 1/10 Din selection.
DOCUMENTATION

• Brochure
• Further information about dimensions, connection and cables is given on the Support pages.

ORDERING

The delivery of standard types from stocks and customer-specific versions can be within a few days. In view of the large number of versions and options for orders you can contact our sales department tel. +31 50-501 37 45 or by email:
sales@rstechnics.nl

Posted on

170S series – Vibration resistant temperature sensor – stainless steel connection head

170s-171s-172s-vibration-resistant-temperature sensor

170s-171s-172s-vibration-resistant-temperature sensor

Specially designed for shipping and heavy industry. Vibration-resistant temperature sensor with stainless steel connection head, resistant to extreme stresses. Custom-made with swivel or nipple process connection and a Lloyd’s approval.

DESCRIPTION

Vibration-resistant sensor, resistant to extreme stresses such as with ship diesel engines or heavy industry! The 170S series is fitted with a stainless steel connection head with cable swivel feed-through PG11 and is vibration-resistant in accordance with Lloyd’s ref.01/30008(E3). This sensor has a process connection in accordance with customer specifications and can be fitted with a 2-wire transmitter type TRM33A.

SPECIFICATIONS
  • temperatuursensor-170S type 170
  • temperatuursensor-171S type 171
  • temperatuursensor-172S type 172
  • Lloyds type approvalLloyd’s approval
Types
  • 170S: Stainless steel vibration-resistant sensor swivel nut with internal thread.
  • 171S: Vibration-resistant stainless steel sensor, nipple with external thread.
  • 172S: Stainless steel vibration-resistant sensor without process connection.

Length, diameter, and measurement system as requested with order.
Possible applications
  • Heavy industrial applications
  • General industry
  • Shipping
  • Diesel engines/Generators
Measurement element
  • PT100
  • PT200
  • PT500
  • PT1000
  • Ni100
  • Ni1000
  • Thermocouple J or K.
Measurement system
  • Single version
  • Duplex version
  • 2, 3 or 4-lead technology.
Temperature range Standard range to a maximum of 300 °C. 
Also suitable for high temperature measurements. 
This is however very much dependent upon the chosen materials, connection cables and construction.
For the correct version, please feel free to contact us.
Materials
  • Measuring section stainless steel-316. 
  • Stainless steel-304 connection head
Dimensions As requested with order
Process connection Refer to type numbers for the desired version, including BSP, NPT screw thread.
Connection cable Screw connection in the connection head , so supplied without cable.
IP-norm  IP-65.
Options 
(for supplement) 
  • Duplex version.
  • Head transmitter TRM33A, measurement range as requested.
  • Measurement system PT100 1/3 Din selection.
  • Measurement system PT100 1/5 Din selection.
  • Measurement system PT100 1/10 Din selection.
DOCUMENTATION

• Brochure
• Further information about dimensions, connection and cables is given on the Support pages.

ORDERING

The delivery of standard types from stocks and customer-specific versions can be within a few days. In view of the large number of versions and options for orders you can contact our sales department tel. +31 50-501 37 45 or by email:
sales@rstechnics.nl

Posted on

150S series – Vibration resistant sensor – alu connection head Form-B

150s-151s-152s-vibration-resistant-temperature sensor

150s-151s-152s-vibration-resistant-temperature sensor

Specially designed for shipping and heavy industry. Vibration-resistant heavy designed temperature sensor with aluminium Form-B connection head, delivered made to measure with swivel or nipple process connection and a Lloyd’s approval.

DESCRIPTION

Vibration-resistant sensor, resistant to extreme stresses such as with ship diesel engines or heavy industry! The 150S series is fitted with a Form-B connection head with cable swivel feed-through PG16 and is vibration-resistant in accordance with Lloyd’s ref.01/30008(E3). This sensor has a process connection in accordance with customer specifications and can be fitted with a 2-wire transmitter type TRM33A.

SPECIFICATIONS
  • temperatuursensor-150S type 150S
  • temperatuursensor-151S type 151S
  • temperatuursensor-152S type 152S
  • Lloyds type approvalLloyd’s approval
Types
  • 150S: Form-B Temperature sensor, vibration-resistant swivel nut with internal thread.
  • 151S: Form-B Temperature sensor, vibration-resistant, nipple with external thread.
  • 152S: Form-B Temperature sensor, vibration-resistant, without process connection.

Length, diameter, and measurement system as requested with order.
Possible applications
  • Heavy industrial applications.
  • General industry.
  • Shipping.
  • Diesel engines/Generators.
Measurement element
  • PT100
  • PT200
  • PT500
  • PT1000
  • Ni100
  • Ni1000
  • Thermocouple J or K
Measurement system
  • Single version
  • Duplex version
  • 2, 3 or 4-lead technology.
Temperature range Standard range to a maximum of 300 °C. 
Also suitable for high temperature measurements. 
This is however very much dependent upon the chosen materials, connection cables and construction.
For the correct version, please feel free to contact us.
Materials
  • Measuring section stainless steel-316.
  • Aluminium connection head.
Dimensions As requested with order.
Process connection Refer to type numbers for the desired version, including BSP, NPT screw thread.
Connection cable Screw connection in the connection head, so supplied without cable.
IP-norm  IP-65.
Options 
(for supplement) 
  • Duplex version.
  • Head transmitter TRM33A, measurement range as requested.
  • Measurement system PT100 1/3 Din selection.
  • Measurement system PT100 1/5 Din selection.
  • Measurement system PT100 1/10 Din selection.
DOCUMENTATION

• Brochure
• Further information about dimensions, connection and cables is given on the Support pages.

ORDERING

The delivery of standard types from stocks and customer-specific versions can be within a few days. In view of the large number of versions and options for orders you can contact our sales department tel. +31 50-501 37 45 or by email:
sales@rstechnics.nl

Posted on

9400 – Robust pressure transmitter

9400-robust pressure transmitter

9400-robust pressure transmitter

Robust industrial pressure transmitter with watertight stainless steel connection head.

DESCRIPTION

The 9400 series Pressure transmitter is an industrial and very robust pressure transmitter fitted with a connection head turned from solid materials and has a screw cap with O-ring seal. The test cell is made from ceramic material that is resistant to most process media The test cell is sealed as standard with an O-ring of VITON or upon request of other materials. For sanitary applications this pressure transmitter can be fitted with a welded stainless steel membrane. Process connection is standard ½“BSP, other connections such as Triclamp, DIN, Dairy or Flange upon request.

SPECIFICATIONS
Types
  • 9400-1: Pressure transmitter with screw cap – IP68 – ¼“BSP external thread connection.
  • 9400-2: Pressure transmitter with screw cap – IP68 – ½“BSP external thread connection.
  • 9400-3: Pressure transmitter with screw cap – IP68 – connection for pipe-clamp connection (series 126) for pipe diameter 6, 8 or 10 mm, indicate upon delivery.
  • 9410-1: Pressure transmitter with bayonet head – IP65 – ¼“BSP external thread connection.
  • 9410-2: Pressure transmitter with bayonet head – IP65 – ½“BSP external thread connection.
Possible applications
  • General industry.
  • Heavy industryClimate control.
  • Foodstuffs industry.
Measurement element Ceramic pressure cell with ring seals.
Output Signal
accuracy Supply voltage 		 4…20 mA.
1% FSR.
4…26 VDC.
Measurement range 0…1 Bar to 0…600 Bar, indicate with order.
Materials Fully in stainless steel-304. Seal of the ceramic test cell with O-ring in material VITON.
Dimensions diameter approx. 65 mm, length approx. 140 mm.
Process connection Refer to type numbers for the desired version
or customer-specific as requested with order, including BSP and NPT connections.
Connection cable Screw connection in the connection head is supplied without cable.
IP-norm  IP-68.
Options 
(for supplement) 
  • Customer specific connection.
  • O-ring seal in other materials for various (aggressive) process media.
DOCUMENTATION

• Brochure
• Further information about dimensions, connection and cables is given on the Support pages.

ORDERING

The delivery of standard types from stocks and customer-specific versions can be within a few days. In view of the large number of versions and options for orders you can contact our sales department tel. +31 50-501 37 45 or by email:
sales@rstechnics.nl

Posted on

PT100 / Thermocouple cables

icon-pt100-thermocouple-cables

icon-pt100-thermocouple-cables

An up-to-date overview with connection cables for PT100 and Thermocouple temperature sensors can be found in our cable booklet.
This contains the various cables, colour codes, connection sequence and specifications.

Click here to see the cable booklet.

Click here for a colour chart of the most commonly used Thermocouple connections.

Do you require more information or wish to receive the booklets by mail?
Click here to request documentation