Tag: pt100

Posted on

TRM30 DIN-rail universal transmitter

icon-trm30-transmitter

icon-trm30-transmitter

Universal Signal transmitter for converting current/voltage signals to another range. Every measurement range between 0/4-20mA or 0-10VDC is possible. Suitable for mounting on a standard DIN-RAIL profile.

DESCRIPTION

Using a TRM-30 transmitter it is possible to convert a current or voltage measurement value to another corresponding measurement signal. This allows, for example, a measurement signal from a 0-10V sensor to be converted to a 4-20 mA PLC input, in any desired measurement range. The TRM-30 is not intended for converting Thermocouple signals; the TRM-33 or TRM-20 transmitters are used for this. We adjust the TRM-30 transmitters to the desired input and output range.

SPECIFICATIONS
Types TRM30: Universal current/voltage transformer.
Description Signal transmitter intended for mounting on a standard DIN-RAIL profile.
Possible applications
  • Industrial applications.
  • Controlling.
  • PLC inputs.
  • Measuring over larger distances.
  • Shipping industry.
  • Machine construction.
Measurement system PT100, current or voltage input, as requested with order.
Measurement range Range PT100, 0/4-20 mA or 0-10VDC as requested with order, for PT100 a minimum span of 50°C applies.
Outputs Current or voltage output, as requested with order.
Power 24 VDC
Accuracy ± 1°C
IP-norm IP54
Dimensions –
Options (for supplement) –
DOCUMENTATION

• Brochure
• Manual
• Connection diagram

ORDERING

The delivery of standard types from stocks and programmed as requested. In view of the large number of versions and options for orders you can contact our sales department tel. +31 50-501 37 45 or by email:
sales@rstechnics.nl

Posted on

SMS-box

icon-support-sms-box

icon-support-sms-box

Support for SMS-box temperature monitor and alarm.
(no longer produced) 

What is the connection sequence for the PT100 inputs:

Brown +
White –
Green-
 

System – Diagnosis, does not see MASTER unit.
 

Unit name incorrectly spelled, may not contain any spaces or punctuation marks.
Example:
incorrect: ‘ SMS-box 1’
correct ‘ SMSbox1 ‘

Measurement value not stable, wobbles a few degrees.

Unit is sensitive to poor EARTHING.
Use protected power and sensor cables, and connect earth of 230V well.

Unit1 is good, Unit2 does not work.

a. Forgot to execute menu ‘Read in data’ after logging in. As a result data from box1 programmed in box2. Program after all remembers data from the last reading out!
b. Incorrect name (with spaces) set; set back to for example ‘SMSbox2′.
c. Waited too long with logging in -must be done within 15 sec.- results in incorrect communication.
Unit started again, within 15 sec. logged in, name changed, set back setting manually to box2.
 

How can you give your measurement value in an SMS message?

Use the button ‘Insert Analogue value’ when formulating the message.
See also HELP, enter Messages.
 

how can you give the text ‘High alarm’ or ‘ Low alarm’ in the alarm message?

Enter a message. For High or Low notification simply create two messages with the relevant alarm limits High or Low. See also HELP, enter Messages.
 

how can you remotely reset an alarm?
Call by telephone and enter #pincode#.
See also HELP, confirming alarm.
 

how can I view the settings without changing them?

On computer select:
-PC log in
-Read in Data
and then view the data in the various windows.
Do NOT press the Program button!
 

what do the LEDs of the modem mean?
DTR: Data terminal ready, modem switched on
DCD: Data Carrier Detect, connection with the SMS central set up. Approx. 1 min. on when sending SMS.
RX: Receive data, flashes briefly when receiving data
TX: Transmit data, flashes briefly when sending data.
 

Downloads
-installation package reading out software v2.10

-manual SMS-box

Posted on

Regiemaster-280

icon-rm280-data logger

icon-rm280-data logger

-REMARK: This product is out of produktion-    
this page is for reference only

Digital recorder for the encoded internal storage of a maximum of 8 measurement inputs. Via the built-in adjustable alarm contacts the measurement values can also be monitored. The saved measurement values and process recordings can then be shown or printed as graph or in table form.

DESCRIPTION

The Regiemaster data logger is an 8-channel digital recorder that independently and automatically saves the measurement values in the internal memory, after which they can be viewed via a computer in table form or graph. The data logger also has two alarm contacts with which various adjustable monitoring functions can be realised.  The saved measurement values can be transferred to the computer via an RS232 connection or a CompactFlash memory card. All settings can be modified via the computer or on the unit itself. As the measurement data is stored encoded it cannot be changed afterwards and so can function as evidence.

SPECIFICATIONS
Types Regiemaster-280: Digital 8 channels measurement values recorder.
Description Data logger with 8 identical measurement channels. Each channel can be set individually if required. See supplements. Housing 144x72mm for panel installation according to DIN43700. LCD display 2×16 characters with background lighting. RS232 connection for communication with computer. RS485 bus for connecting several Regiemasters. Relay contacts N.O. for Alarm functions and Sensor Error. The RM280 is supplied complete with mounting and connection components, power module 230V-24Vdc, DIN-rail connector block for connecting measurement signals, RS232 cable. Software for reading out and displaying measurement values and setting parameters.Software suitable for MS-Windows 95/98/2000/XP. All connections with screw/insert connectors. Delivered including connection and mounting materials.
Possible applications
  • Process monitoring/control.
  • HACCP control.
  • Registering Cooling transport.
  • Controling temp/%RH in homes.
Measurement system As requested with order: PT100 – IEC60751/3-lead Voltage or current inputs.
Measurement range Available in various types of measurement inputs, standard 8 identical input ranges. These can be modified per channel with a certain range:

  • PT100 range e.g. -50.0…+50.0°C, 0.0…200.0°C, -50…+350 °C.
  • 4-20 mA range 0…100%, display range freely adjustable.
  • 0-10 Vdc range 0…100%, display range freely adjustable.
Outputs Two relay contacts, potential-free contact N.O., max. 3 Amp @ 250VAC.
Power 24VDC connection supplied standard with power module for connection to 230VAC
Accuracy ± 1% FSR
IP-norm IP54 (front/panel side)
Dimensions Panel installation 144×96, depth 110 mm.
Options (for supplement)
  • Conversion to another measurement range, supplement per measurement input.
  • Memory card Compact-flash 32MB (incl. adapter).
  • RS232 serial cable length 2 metres.
  • Plug connecting to two RM280 data loggers.
  • Cable for connecting several data loggers via the RS485 bus, length 2 metres.
  • DCF-atomic clock receiver, which synchronises the internal clock of the data logger for applications whereby accurate time registration is important.
  • Front with transparent and lockable door.
  • USB-PCMCIA-reader for reading out the memory cards on a PC.
  • Set Line drivers for extending RS232 communication to approx. 200 metres (Excluding cable. This can be supplied at any length).
  • Regiemaster read out software with extension for automatic reading out via the computer at preset times.
  • Installed in switch box or housing for wall mounting.
  • Installed in transportable case with battery.
DOCUMENTATION

• Brochure

• Regiemaster280 Manual
• RM280 Software Manual
• Connection diagram connector block

• RM280 control software Dutch version [download]
REMARK: This software is designed for Windows 98/Vista/XP only.
We cannot guarantee proper operation in newer versions Windows-7 and above.

ORDERING

The delivery of standard types from stocks and customer-specific versions can be within a few days. In view of the large number of models and options for orders you can contact our sales department< tel. +31 50-501 37 45 or by email:
sales@rstechnics.nl

Posted on

PI31 Programmable indicator vertical

icon-pi31-indicator

icon-pi31-indicator

Digital indicator with 2 programmable alarm contacts for display, monitoring and regulation of temperature and process values. Panel installation, available in many standard or customer-specific measurement ranges.

DESCRIPTION

In addition to the display of measurement values the Pi-indicator has two programmable switch contacts through which various switch functions can be realised. By using a single-chip micro-controller all settings, switch points and switch functions can be simply programmed by the user. The Pi-31 indicator is supplied including mounting and connection components in a vertical DIN housing for panel installation 48×96 mm. Thanks to the internal universal input card a large number of input ranges are possible. This can also be supplied completely installed in a cabinet, possibly with connection clamps and wiring.

SPECIFICATIONS
Types Pi-31: indicator with 2 programmable switch contacts, vertical model.
Description Programmable indicator in DIN housing NG96x48 mm. Vertical model. Two independent relay contacts max. 3 Amp @ 250 VAC with various possible switch functions and freely adjustable switch points. A selection of measurement inputs available, ask about the possibilities or for a data sheet. Standard with a red LED display, 3.5 digit and character height 14 mm. A LED display in green colour is optional. Supplied including mounting brackets and connection components.
Possible applications
  • Industrial applications.
  • Process control.
  • Shipping.
  • Machine construction.
Measurement system As requested with order: PT100 – IEC60751/3-lead, Thermocouple J or K, Voltage 0-1 VDC or 0-10 VDC, Current 0-20 mA or 4-20 mA.
Measurement range PT100: -50.0 … +350.0°C / 0-800°C, Thermocouple: 0-500°C / 0-1200°C, Current/voltage: 0.0 … 100.0%, freely adjustable display value. Other ranges possible upon request.
Outputs Two relay contacts, potential-free make-and-break-contact.
Power Standard 230 VAC – 50/60 Hz, optional in 24 VDC, 24 VAC or 115 VAC.
Accuracy ± 1% FSR.
IP-norm IP54 (front/panel side).
Dimensions Panel installation 48x96mm, depth 110 mm.
Options(for supplement)
  • Customer-specific / non-standard measurement range.
  • customer-specific / non-standard supply voltage.
  • Display LEDs in green.
  • Front plate with own logo, company name or measurement unit.
  • Connection with screw connector-block instead of the standard faston-connections.
  • Installed in a cabinet or housing for wall mounting.
DOCUMENTATION

• Brochure
• Manual and connection diagram
• Manual menu 6 range adjustment

ORDERING

The delivery of standard types from stocks and customer-specific versions can be within a few days. In view of the large number of versions and options for orders you can contact our sales department tel. +31 50-501 37 45 or by email:
sales@rstechnics.nl

Posted on

PI30 Programmable indicator horizontal

icon-pi30-indicator

icon-pi30-indicator

Digital indicator with 2 programmable alarm contacts for display, monitoring and regulation of temperature and process values. Panel installation, available in many standard or customer-specific measurement ranges.

DESCRIPTION

In addition to the display of measurement values the Pi-indicator has two programmable switch contacts through which various switch functions can be realised. By using a single-chip micro-controller all settings, switch points and switch functions can be simply programmed by the user. The indicators are supplied including mounting and connection components in a DIN housing for panel installation 96×48 mm. Thanks to the internal universal input card a large number of input ranges are possible. This can also be supplied completely installed in a cabinet, possibly with connection clamps and wiring.

SPECIFICATIONS
Types Pi-30: indicator with 2 programmable switch contacts, horizontal model.
Description Programmable indicator in DIN housing NG96x48 mm. Horizontal model. Two independent relay contacts max. 3 Amp @ 250 VAC with various possible switch functions and freely adjustable switch points. A selection of measurement inputs available, ask about the possibilities or for a data sheet. Standard with a red LED display, 3.5 digit and character height 14 mm. A LED display in green colour is optional. Supplied including mounting brackets and connection components.
Possible applications
  • Industrial applications.
  • Process control.
  • Shipping.
  • Machine construction.
Measurement system As requested with order: PT100 – IEC60751/3-lead, Thermocouple J or K, Voltage 0-1 VDC or 0-10 VDC, Current 0-20 mA or 4-20 mA.
Measurement range PT100: -50.0 … +350.0°C / 0-800°C, Thermocouple: 0-500°C / 0-1200°C, Current/voltage: 0.0 … 100.0%, freely adjustable display value. Other ranges possible upon request.
Outputs Two relay contacts, potential-free make-and-break-contact.
Power Standard 230 VAC – 50/60 Hz, optional in 24 VDC, 24 VAC or 115 VAC.
Accuracy ± 1% FSR
IP-norm IP54 (front/panel side).
Dimensions Panel installation 96x48mm, depth 110 mm.
Options (for supplement)
  • Customer-specific / non-standard measurement range.
  • Customer-specific / non-standard supply voltage.
  • Display LEDs in green.
  • Front plate with own logo, company name or measurement unit.
  • Connection with screw connector-block instead of the standard faston-connections.
  • Installed in a cabinet or housing for wall mounting.
DOCUMENTATION

• Brochure
• Manual and connection diagram 
• Manual menu 6 range adjustment

ORDERING

The delivery of standard types from stocks and customer-specific versions can be within a few days. In view of the large number of versions and options for orders you can contact our sales department tel. +31 50-501 37 45 or by email:
sales@rstechnics.nl

Posted on

TS20 Switch module dual

icon-ts20-switch module

icon-ts20-switch module

Switch module for process monitoring with independent adjustable switching points and 4…20 mA retransmission output signal.

DESCRIPTION

The TS-modules are professional switch modules intended, for example, for the local monitoring of part of a process. These modules are suitable for mounting on standard DIN rails, and are available with one or two independent switching points. The switching point can be set by using the rotary knob on the front, is this point exceeded a relay contact is switched. In addition, the input signal is converted to a 4…20 mA retransmission output signal, intended e.g. for controlling a PLC, indicator or recorder.
Optionally the TS module can be supplied in a “tropical seal” version. Hereby, the internal electronics are protected by a urethane seal against a higher air humidity, for example for use in the shipping industry.

SPECIFICATIONS
Types TS20: Switch module with two independent adjustable switching points.
Description Switch module for process monitoring with two adjustable switching points and 4…20 mA retransmission output signal. Plastic housing for DIN rail mounting.
Possible applications
  • Industrial applications.
  • Process control.
  • Shipping.
  • Machine construction.
Measurement system PT100 – IEC60751-3 lead.
Measurement range Measurement range 0…100 °C or 0…200°C, request with order. Adjustable switch differential: ±1-10% FSR.
Outputs
  • 2 Relays with make-and-break contact max. 3 Amp @ 250 VAC
  • Switch function: Cooling or Heating, request with order.
  • 4…20 mA retransmission output signal, follows the measured input value.
Power Standard 230VAC – 50/60Hz, optional in 24VDC
Accuracy ± 1°C
IP-norm IP54
Dimensions –
Options (for supplement)
  • Customer-specific / non standard measurement. This can be with PT100 temperature ranges or Current/Voltage input.
  • Customer-specific/ non standard supply voltage.
  • “Tropical Seal” version.
  • Front plate with own logo, company name or measurement unit.
DOCUMENTATION

• Brochure
• Manual
• Connection diagram

ORDERING

The delivery of standard types from stocks and customer-specific versions can be within a few days. In view of the large number of versions and options for orders you can contact our sales department tel. +31 50-501 37 45 or by email:
sales@rstechnics.nl

Posted on

TS20 Switch module dual

icon-ts20-switch module

icon-ts20-switch module

Switch module for process monitoring with independent adjustable switching points and 4…20 mA retransmission output signal.

DESCRIPTION

The TS-modules are professional switch modules intended, for example, for the local monitoring of part of a process. These modules are suitable for mounting on standard DIN rails, and are available with one or two independent switching points. The switching point can be set by using the rotary knob on the front, is this point exceeded a relay contact is switched. In addition, the input signal is converted to a 4…20 mA retransmission output signal, intended e.g. for controlling a PLC, indicator or recorder.
Optionally the TS module can be supplied in a “tropical seal” version. Hereby, the internal electronics are protected by a urethane seal against a higher air humidity, for example for use in the shipping industry.

SPECIFICATIONS
Types TS20: Switch module with two independent adjustable switching points.
Description Switch module for process monitoring with two adjustable switching points and 4…20 mA retransmission output signal. Plastic housing for DIN rail mounting.
Possible applications
  • Industrial applications.
  • Process control.
  • Shipping.
  • Machine construction.
Measurement system PT100 – IEC60751-3 lead.
Measurement range Measurement range 0…100 °C or 0…200°C, request with order. Adjustable switch differential: ±1-10% FSR.
Outputs
  • 2 Relays with make-and-break contact max. 3 Amp @ 250 VAC
  • Switch function: Cooling or Heating, request with order.
  • 4…20 mA retransmission output signal, follows the measured input value.
Power Standard 230VAC – 50/60Hz, optional in 24VDC
Accuracy ± 1°C
IP-norm IP54
Dimensions –
Options (for supplement)
  • Customer-specific / non standard measurement. This can be with PT100 temperature ranges or Current/Voltage input.
  • Customer-specific/ non standard supply voltage.
  • “Tropical Seal” version.
  • Front plate with own logo, company name or measurement unit.
DOCUMENTATION

• Brochure
• Manual
• Connection diagram

ORDERING

The delivery of standard types from stocks and customer-specific versions can be within a few days. In view of the large number of versions and options for orders you can contact our sales department tel. +31 50-501 37 45 or by email:
sales@rstechnics.nl

Posted on

TS10 Switch module single

icon-ts10-switch module

icon-ts10-switch module

Switch module for process monitoring with one adjustable switching point and 4…20 mA retransmission output signal.

DESCRIPTION

The TS-modules are professional switch modules intended, for example, for the local monitoring of part of a process. These modules are suitable for mounting on standard DIN rails, and are available with one or two independent switching points. The switching point can be set by using the rotary knob on the front, is this point exceeded a relay contact is switched. In addition, the input signal is converted to a 4…20 mA retransmission output signal, intended e.g. for controlling a PLC, indicator or recorder.
Optionally the TS module can be supplied in a “tropical seal” version. Hereby, the internal electronics are protected by a urethane seal against a higher air humidity, for example for use in the shipping industry.

SPECIFICATIONS
Types TS10: Switch module with one independent adjustable switch point.
Description Switch module for process monitoring with adjustable switch point and 4…20 mA retransmission output signal. Plastic housing for DIN rail mounting.
Possible applications
  • Industrial applications.
  • Process control.
  • Shipping.
  • Machine construction.
Measurement system PT100 – IEC60751-3 lead.
Measurement range Measurement range 0…100 °C or 0…200°C, requested with order. Adjustable switch differential: ±1-10% FSR.
Outputs
  • 1 Relay make-and-break contact max. 3 Amp @ 250 VAC.
  • Switch function: Cooling or Heating, requested with order.
  • 4…20 mA retransmission output signal, follows the measured input value.
Power Standard 230VAC – 50/60 Hz. Optional in 115VAC or 24Vdc
Accuracy ± 1°C
IP-norm IP54
Dimensions –
Options (for supplement)
  • Customer-specific / non standard measurement range. This can be with PT100 temperature ranges or Current/Voltage input.
  • Customer-specific/ non standard supply voltage.
  • “Tropical Sealed” version.
  • Front plate with own logo, company name or measurement unit.
DOCUMENTATION

• Brochure
• Manual
• Connection diagram

ORDERING

The delivery of standard types from stocks and customer-specific versions can be within a few days. In view of the large number of versions and options for orders you can contact our sales department tel. +31 50-501 37 45 or by email:
sales@rstechnics.nl

Posted on

TS10 Switch module single

icon-ts10-switch module

icon-ts10-switch module

Switch module for process monitoring with one adjustable switching point and 4…20 mA retransmission output signal.

DESCRIPTION

The TS-modules are professional switch modules intended, for example, for the local monitoring of part of a process. These modules are suitable for mounting on standard DIN rails, and are available with one or two independent switching points. The switching point can be set by using the rotary knob on the front, is this point exceeded a relay contact is switched. In addition, the input signal is converted to a 4…20 mA retransmission output signal, intended e.g. for controlling a PLC, indicator or recorder.
Optionally the TS module can be supplied in a “tropical seal” version. Hereby, the internal electronics are protected by a urethane seal against a higher air humidity, for example for use in the shipping industry.

SPECIFICATIONS
Types TS10: Switch module with one independent adjustable switch point.
Description Switch module for process monitoring with adjustable switch point and 4…20 mA retransmission output signal. Plastic housing for DIN rail mounting.
Possible applications
  • Industrial applications.
  • Process control.
  • Shipping.
  • Machine construction.
Measurement system PT100 – IEC60751-3 lead.
Measurement range Measurement range 0…100 °C or 0…200°C, requested with order. Adjustable switch differential: ±1-10% FSR.
Outputs
  • 1 Relay make-and-break contact max. 3 Amp @ 250 VAC.
  • Switch function: Cooling or Heating, requested with order.
  • 4…20 mA retransmission output signal, follows the measured input value.
Power Standard 230VAC – 50/60 Hz. Optional in 115VAC or 24Vdc
Accuracy ± 1°C
IP-norm IP54
Dimensions –
Options (for supplement)
  • Customer-specific / non standard measurement range. This can be with PT100 temperature ranges or Current/Voltage input.
  • Customer-specific/ non standard supply voltage.
  • “Tropical Sealed” version.
  • Front plate with own logo, company name or measurement unit.
DOCUMENTATION

• Brochure
• Manual
• Connection diagram

ORDERING

The delivery of standard types from stocks and customer-specific versions can be within a few days. In view of the large number of versions and options for orders you can contact our sales department tel. +31 50-501 37 45 or by email:
sales@rstechnics.nl

Posted on

TRM20 DIN-rail temperature transmitter

icon-trm20-transmitter

icon-trm20-transmitter

Signal transmitter with two-wire measurement systems for converting the measured temperature to a 4-20 mA signal. Suitable for mounting on standard DIN-RAIL profile, and available for PT100 or Thermocouple.

DESCRIPTION

Using a TRM-20 transmitter it is possible to convert a temperature measurement value to a standard 4-20 mA measurement signal. This makes it possible to convert a large number of diverse temperature signals to, for example, a standard PLC input which allows larger distances to also be bridged. The TRM-33 series of transmitter heads can be directly built into the connection head of the temperature sensor, whilst the TRM-20/30 series of transmitters is intended for mounting on DIN rails in for example switch boxes. We adjust the TRM20 transmitters according to the desired measurement system and measurement range.

SPECIFICATIONS
Types
  • TRM20W: DIN-rail transmitter for PT100–IEC60751–3 lead.
  • TRM20T: DIN-rail transmitter for Thermocouple J or K.
Description Signal transmitter intended for mounting on a standard DIN-RAIL profile.
Possible applications
  • Industrial applications.
  • Controlling.
  • PLC inputs.
  • Measuring over larger distances.
  • Shipping industry.
  • Machine construction.
Measurement system PT100/Thermocouple as requested with order.
Measurement range Measurement range as requested with order.
Outputs 4…20 mA output signal, follows the measured input value.
Power 14-35 VDC, loop-powered.
Accuracy ± 1°C
IP-norm IP54
Dimensions –
Options (for supplement) –
DOCUMENTATION

• Brochure
• Manual
• Connection diagram

ORDERING

The delivery of standard types from stocks and programmed as requested. In view of the large number of versions and options for orders you can contact our sales department tel. +31 50-501 37 45 or by email:
sales@rstechnics.nl