SMS-box

icon-support-sms-box

icon-support-sms-box

Support for SMS-box temperature monitor and alarm.
(no longer produced) 


What is the connection sequence for the PT100 inputs:

Brown +
White –
Green-
 


System – Diagnosis, does not see MASTER unit.
 

Unit name incorrectly spelled, may not contain any spaces or punctuation marks.
Example:
incorrect: ‘ SMS-box 1’
correct ‘ SMSbox1 ‘


Measurement value not stable, wobbles a few degrees.

Unit is sensitive to poor EARTHING.
Use protected power and sensor cables, and connect earth of 230V well.


Unit1 is good, Unit2 does not work.

a. Forgot to execute menu ‘Read in data’ after logging in. As a result data from box1 programmed in box2. Program after all remembers data from the last reading out!
b. Incorrect name (with spaces) set; set back to for example ‘SMSbox2′.
c. Waited too long with logging in -must be done within 15 sec.- results in incorrect communication.
Unit started again, within 15 sec. logged in, name changed, set back setting manually to box2.
 


How can you give your measurement value in an SMS message?

Use the button ‘Insert Analogue value’ when formulating the message.
See also HELP, enter Messages.
 


how can you give the text ‘High alarm’ or ‘ Low alarm’ in the alarm message?

Enter a message. For High or Low notification simply create two messages with the relevant alarm limits High or Low. See also HELP, enter Messages.
 


how can you remotely reset an alarm?
Call by telephone and enter #pincode#.
See also HELP, confirming alarm.
 


how can I view the settings without changing them?

On computer select:
-PC log in
-Read in Data
and then view the data in the various windows.
Do NOT press the Program button!
 


what do the LEDs of the modem mean?
DTR: Data terminal ready, modem switched on
DCD: Data Carrier Detect, connection with the SMS central set up. Approx. 1 min. on when sending SMS.
RX: Receive data, flashes briefly when receiving data
TX: Transmit data, flashes briefly when sending data.
 


Downloads
-installation package reading out software v2.10

-manual SMS-box

LC06 OEM thermostat

icon-lc06-thermostat

icon-lc06-thermostat

Compact OEM thermostat with internal set point trimmer, permanent switch differential and high power relay contact max. 15 Amp. @ 230VAC.

DESCRIPTION

The LC-thermostat series are compact professional thermostats for regulating temperature in cooling and heating technology for a large number of applications. The measurement is based on the highly stable and accurate PT100 sensor. Various standard versions, ranges and housings are available for the various applications. We can of course provide you with comprehensive advice regarding suitable sensors. In addition to the standard versions it is possible to supply a thermostat in a customer-specific range or version. Attractive discounts apply to larger series.

SPECIFICATIONS
Types LC06: OEM Thermostat with internal set point-trimmer, indicate range.
Description Compact thermostat in flat steel housing, connection via 6,3mm Fastons. Internal set point-trimmer, specially developed, for example, coffee machines. Supplied whit mounted cable sensor model 156, pocket 50×6 mm, with 2 metre PVC cable.
Possible applications
  • Industrial applications.
  • Process control.
  • Machine construction.
  • Coffee machines.
  • Frost protection.
  • Cool/Freeze display cases.
Measurement system PT100 – IEC60751-3 lead.
Measurement range Standard measurement ranges: 70…100°C, 0…100° or 0…200°C. Other ranges possible upon request. Permanent switch differential: ±1% FSR.
Outputs high power relay contact max. 15 Amp. @ 230V AC.
Power Standard 230 VAC – 50/60 Hz, optional in 24 VDC (ask for the suitable versions).
Accuracy ± 1°C.
IP-norm IP44.
Dimensions
Options (for supplement)
  • Customer-specific / non-standard measurement range.
  • Customer-specific / non-standard supply voltage.
  • Front plate with own logo, company name or measurement unit.
DOCUMENTATION

• Brochure
• Example switch functions (Dutch)
• Examples switching functions (English)

ORDERING

The delivery of standard types from stocks and customer-specific versions can be within a few days. In view of the large number of versions and options for orders you can contact our sales department tel. +31 50-501 37 45 or by email:
sales@rstechnics.nl

TS20 Switch module dual

icon-ts20-switch module

icon-ts20-switch module

Switch module for process monitoring with independent adjustable switching points and 4…20 mA retransmission output signal.

DESCRIPTION

The TS-modules are professional switch modules intended, for example, for the local monitoring of part of a process. These modules are suitable for mounting on standard DIN rails, and are available with one or two independent switching points. The switching point can be set by using the rotary knob on the front, is this point exceeded a relay contact is switched. In addition, the input signal is converted to a 4…20 mA retransmission output signal, intended e.g. for controlling a PLC, indicator or recorder.
Optionally the TS module can be supplied in a “tropical seal” version. Hereby, the internal electronics are protected by a urethane seal against a higher air humidity, for example for use in the shipping industry.

SPECIFICATIONS
Types TS20: Switch module with two independent adjustable switching points.
Description Switch module for process monitoring with two adjustable switching points and 4…20 mA retransmission output signal. Plastic housing for DIN rail mounting.
Possible applications
  • Industrial applications.
  • Process control.
  • Shipping.
  • Machine construction.
Measurement system PT100 – IEC60751-3 lead.
Measurement range Measurement range 0…100 °C or 0…200°C, request with order. Adjustable switch differential: ±1-10% FSR.
Outputs
  • 2 Relays with make-and-break contact max. 3 Amp @ 250 VAC
  • Switch function: Cooling or Heating, request with order.
  • 4…20 mA retransmission output signal, follows the measured input value.
Power Standard 230VAC – 50/60Hz, optional in 24VDC
Accuracy ± 1°C
IP-norm IP54
Dimensions
Options (for supplement)
  • Customer-specific / non standard measurement. This can be with PT100 temperature ranges or Current/Voltage input.
  • Customer-specific/ non standard supply voltage.
  • “Tropical Seal” version.
  • Front plate with own logo, company name or measurement unit.
DOCUMENTATION

• Brochure
• Manual
• Connection diagram

ORDERING

The delivery of standard types from stocks and customer-specific versions can be within a few days. In view of the large number of versions and options for orders you can contact our sales department tel. +31 50-501 37 45 or by email:
sales@rstechnics.nl

TS20 Switch module dual

icon-ts20-switch module

icon-ts20-switch module

Switch module for process monitoring with independent adjustable switching points and 4…20 mA retransmission output signal.

DESCRIPTION

The TS-modules are professional switch modules intended, for example, for the local monitoring of part of a process. These modules are suitable for mounting on standard DIN rails, and are available with one or two independent switching points. The switching point can be set by using the rotary knob on the front, is this point exceeded a relay contact is switched. In addition, the input signal is converted to a 4…20 mA retransmission output signal, intended e.g. for controlling a PLC, indicator or recorder.
Optionally the TS module can be supplied in a “tropical seal” version. Hereby, the internal electronics are protected by a urethane seal against a higher air humidity, for example for use in the shipping industry.

SPECIFICATIONS
Types TS20: Switch module with two independent adjustable switching points.
Description Switch module for process monitoring with two adjustable switching points and 4…20 mA retransmission output signal. Plastic housing for DIN rail mounting.
Possible applications
  • Industrial applications.
  • Process control.
  • Shipping.
  • Machine construction.
Measurement system PT100 – IEC60751-3 lead.
Measurement range Measurement range 0…100 °C or 0…200°C, request with order. Adjustable switch differential: ±1-10% FSR.
Outputs
  • 2 Relays with make-and-break contact max. 3 Amp @ 250 VAC
  • Switch function: Cooling or Heating, request with order.
  • 4…20 mA retransmission output signal, follows the measured input value.
Power Standard 230VAC – 50/60Hz, optional in 24VDC
Accuracy ± 1°C
IP-norm IP54
Dimensions
Options (for supplement)
  • Customer-specific / non standard measurement. This can be with PT100 temperature ranges or Current/Voltage input.
  • Customer-specific/ non standard supply voltage.
  • “Tropical Seal” version.
  • Front plate with own logo, company name or measurement unit.
DOCUMENTATION

• Brochure
• Manual
• Connection diagram

ORDERING

The delivery of standard types from stocks and customer-specific versions can be within a few days. In view of the large number of versions and options for orders you can contact our sales department tel. +31 50-501 37 45 or by email:
sales@rstechnics.nl

TS10 Switch module single

icon-ts10-switch module

icon-ts10-switch module

Switch module for process monitoring with one adjustable switching point and 4…20 mA retransmission output signal.

DESCRIPTION

The TS-modules are professional switch modules intended, for example, for the local monitoring of part of a process. These modules are suitable for mounting on standard DIN rails, and are available with one or two independent switching points. The switching point can be set by using the rotary knob on the front, is this point exceeded a relay contact is switched. In addition, the input signal is converted to a 4…20 mA retransmission output signal, intended e.g. for controlling a PLC, indicator or recorder.
Optionally the TS module can be supplied in a “tropical seal” version. Hereby, the internal electronics are protected by a urethane seal against a higher air humidity, for example for use in the shipping industry.

SPECIFICATIONS
Types TS10: Switch module with one independent adjustable switch point.
Description Switch module for process monitoring with adjustable switch point and 4…20 mA retransmission output signal. Plastic housing for DIN rail mounting.
Possible applications
  • Industrial applications.
  • Process control.
  • Shipping.
  • Machine construction.
Measurement system PT100 – IEC60751-3 lead.
Measurement range Measurement range 0…100 °C or 0…200°C, requested with order. Adjustable switch differential: ±1-10% FSR.
Outputs
  • 1 Relay make-and-break contact max. 3 Amp @ 250 VAC.
  • Switch function: Cooling or Heating, requested with order.
  • 4…20 mA retransmission output signal, follows the measured input value.
Power Standard 230VAC – 50/60 Hz. Optional in 115VAC or 24Vdc
Accuracy ± 1°C
IP-norm IP54
Dimensions
Options (for supplement)
  • Customer-specific / non standard measurement range. This can be with PT100 temperature ranges or Current/Voltage input.
  • Customer-specific/ non standard supply voltage.
  • “Tropical Sealed” version.
  • Front plate with own logo, company name or measurement unit.
DOCUMENTATION

• Brochure
• Manual
• Connection diagram

ORDERING

The delivery of standard types from stocks and customer-specific versions can be within a few days. In view of the large number of versions and options for orders you can contact our sales department tel. +31 50-501 37 45 or by email:
sales@rstechnics.nl

TS10 Switch module single

icon-ts10-switch module

icon-ts10-switch module

Switch module for process monitoring with one adjustable switching point and 4…20 mA retransmission output signal.

DESCRIPTION

The TS-modules are professional switch modules intended, for example, for the local monitoring of part of a process. These modules are suitable for mounting on standard DIN rails, and are available with one or two independent switching points. The switching point can be set by using the rotary knob on the front, is this point exceeded a relay contact is switched. In addition, the input signal is converted to a 4…20 mA retransmission output signal, intended e.g. for controlling a PLC, indicator or recorder.
Optionally the TS module can be supplied in a “tropical seal” version. Hereby, the internal electronics are protected by a urethane seal against a higher air humidity, for example for use in the shipping industry.

SPECIFICATIONS
Types TS10: Switch module with one independent adjustable switch point.
Description Switch module for process monitoring with adjustable switch point and 4…20 mA retransmission output signal. Plastic housing for DIN rail mounting.
Possible applications
  • Industrial applications.
  • Process control.
  • Shipping.
  • Machine construction.
Measurement system PT100 – IEC60751-3 lead.
Measurement range Measurement range 0…100 °C or 0…200°C, requested with order. Adjustable switch differential: ±1-10% FSR.
Outputs
  • 1 Relay make-and-break contact max. 3 Amp @ 250 VAC.
  • Switch function: Cooling or Heating, requested with order.
  • 4…20 mA retransmission output signal, follows the measured input value.
Power Standard 230VAC – 50/60 Hz. Optional in 115VAC or 24Vdc
Accuracy ± 1°C
IP-norm IP54
Dimensions
Options (for supplement)
  • Customer-specific / non standard measurement range. This can be with PT100 temperature ranges or Current/Voltage input.
  • Customer-specific/ non standard supply voltage.
  • “Tropical Sealed” version.
  • Front plate with own logo, company name or measurement unit.
DOCUMENTATION

• Brochure
• Manual
• Connection diagram

ORDERING

The delivery of standard types from stocks and customer-specific versions can be within a few days. In view of the large number of versions and options for orders you can contact our sales department tel. +31 50-501 37 45 or by email:
sales@rstechnics.nl

TM16 – Temperature Monitor for 16 channels

icon-tm16-temperature-monitor

icon-tm16-temperature-monitor

The TempMonitor-16 is the solution for displaying and monitoring a maximum of 16 measurement signals on 1 central display unit. By means of the push buttons the desired measurement value can be shown on the display, and the settings for the monitoring contact can be changed.

DESCRIPTION

The TempMonitor-16 is a compact monitor unit specially developed for simultaneously monitoring a maximum of 16 measurement signals. The TempMonitor-16 has two alarm contacts. The alarm function can be set separately for each measurement channel. By means of the LCD display and the push buttons on the front the measurement value of each channel can be displayed. If an alarm is given the measurement value of the channel in question is automatically displayed and a notification follows with the Relay contact and indication via LED and internal acoustic Buzzer. Fail-safe alarm contact with detection of sensor faults. This unit is intended for panel installation.

SPECIFICATIONS
Types TM16: Temperatur Monitor with 16 inputs.
Description Programmable 16-channel temperature monitor in housing for panel installation NG144x72mm. LCD-display 2×16 characters with background lighting. 2 Alarm relay max. 3 Amp @ 250 VAC. All connections with screw/insert connectors. Supplied including connection and mounting materials.
Possible applications
  • Industrial applications.
  • Process control.
  • Shipping.
  • Machine construction.
Measurement system As requested with order:

  • PT100 – IEC60751/3-lead
  • Thermocouple J or K
  • Voltage 0-10VDC
  • Current 4-20 mA
Measurement range Available measuring inputs, all 16 channels are in the same range:

  • PT100: -50…+200 °C and 0…600 °C.
  • Thermocouple-J: 0…500 °C.
  • Thermocouple-K: 0…1200 °C.
  • Current: 0…100 °C, Display range adjustable.
  • Voltage: 0…100 °C, Display range adjustable
Outputs Two relay contacts, potential-free contact N.O., max. 3 Amp @ 250 VAC.
Power Standard 230 VAC – 50/60 Hz, optional in 24 VDC.
Accuracy ± 1% FSR.
IP-norm IP54 (front/panel side).
Dimensions Panel installation 144×72, depth 110 mm.
Options (for supplement)
  • Front plate with own logo, company name or measurement unit
  • Installed in a cabinet or housing for wall mounting
DOCUMENTATION

• Brochure
• Manual and connection diagram

ORDERING

The delivery of standard types from stocks and customer-specific versions can be within a few days.In view of the large number of versions and options for orders you can contact our sales department tel. +31 50-501 37 45 or by email:
sales@rstechnics.nl

LB08 Milk tank monitor

icon-lb08-dairy-tank monitor

icon-lb08-dairy-tank monitor

High quality data logger and control unit for monitoring the milk stored in the dairy tank. 

DESCRIPTION

RS Technics has been developing and manufacturing control equipment for use in the tank rooms of dairy farmers all over the world. The dairy monitoring of our company is well-known amongst farmers and dairy processing plants. With the latest addition from this family, the LB-08: Dairy Tank Monitor, a financially-friendly alternative has been introduced that has all the properties necessary to constantly monitor the quality of the milk. By means of accurate measurements on the outside of the tank or inside the tank, the LB-08 can measure the current temperature of the milk, detect the correct operation of the mixing gear, check the cleaning and sound an alarm as soon as a problem threatens to occur. In addition to an internal buzzer this tank monitor has an adjustable relay output for an external alarm. The LB-08 collects all measurement data and stores this in the internal memory (capacity of approx. 50,000 measurements). This data can be transferred to a laptop or PC via a USB connection and presented in graphs or clear tables. Although the LB-08 has been primarily developed for use in the dairy processing industry, this can of course be modified according to the specific requirements of customers for the monitoring of numerous other products stored in tanks. Please feel free to ask for more information or indicate your application!

Principle:
The tank monitor works normally via a fixed control pattern:

  • status MILKING
  • there is milk in the tank and new milk can be added. This can therefore take a few days.

  • status TANK EMPTY BEFORE CLEANING
  • Tank is empty and still has to be cleaned.

  • status CLEANING
  • Tank is filled with water and cleaning agent; busy with cleaning.

  • status TANK EMPTY AFTER CLEANING
  • Tank empty; ready for new milk.

All these things are accurately and constantly monitored whereby undesired deviations are indicated and converted into a clear alarm!

SPECIFICATIONS
Types
  • LB08-2:Tank monitor with 2 measurement inputs, monitors the milk tank.
  • LB08-3: Dairy Monitor 3 inputs, monitors the milk tank and cleaning.
Description
  • High quality data logger and control unit for monitoring dairy and other liquids in the storage tanks.
  • Status notification via 5 red/green indication LEDs and alarm via flashing LED indication and buzzer.
  • Connection via internal screw connectors.
  • Front plate with push buttons and display LCD white/blue with background lighting.
  • USB connection for setting and reading out via computer.
  • Light grey ABS housing (UL94V-0), wall mounting with screws.
Possible applications
  • Dairy processing industry.
  • Milk tanks, RMO.
  • Applications in monitoring tank storage.
Measurement system PT100-IEC60751/3L sensor for internal or external measurement on the tank.
Measurement range -10…+90 °C
Outputs
  • 1 Relay contact, N.O. max. 3 Amp.@ 250VAC.
  • auxiliary voltage 12 VDC, max. 100 mA, for alarms.
Power Universal 80-240VAC – 50/60 Hz
Accuracy ± 1% FSR
IP-norm IP65
Dimensions (lxwxd): 160 x 130 x 60 mm excl. swivels and cables.
Options (for supplement)
  • Software adjustments for control and alarm parameters etc.
  • OEM version fitted with your own front plate print.
DOCUMENTATION

• Brochure LB08 (Dutch)
• Brochure LB08 (German)
• Brochure LB08 (English)

ORDERING

The delivery of standard types from stocks and customer-specific versions can be within a few days. In view of the large number of versions and options for orders you can contact our sales department tel. +31 50-501 37 45 or by email:
sales@rstechnics.nl

LC055 Hi-power thermostat

icon-lc055-thermostat

icon-lc055-thermostat

Industrial thermostat with rotary knob on front or internal trimmer, adjustable switch differential and relay contact max. 15 Amp. @ 230 VAC.

DESCRIPTION

The LC-thermostat series are compact professional thermostats for regulating temperature in cooling and freezing technology for a large number of applications. The measurement is based on the highly stable and accurate PT100 sensor. Various standard versions, ranges and housings are available for the various applications. We can of course provide you with comprehensive advice regarding suitable sensors. In addition to the standard versions it is possible to supply a thermostat in a customer-specific range or version. Attractive discounts apply to larger series.

SPECIFICATIONS
Types
  • LC055-1: Thermostat with rotary knob and scale markings on the front plate.
  • LC055-2: Thermostat with internal set point-trimmer, no scale marking on the outside.
Description Thermostat in plastic housing, with high power relay contact. Rotary knob on front, specially for cool/freeze applications. Supplied with screw clamps for connection cables and mounted cable sensor model 156, pocket 50×6 mm, with 2 metre PVC cable.
Possible applications
  • Industrial applications.
  • Process control.
  • Machine construction.
  • Coffee machines.
  • Frost protection.
  • Cool/Freeze display cases.
Measurement system PT100 – IEC60751-3 lead.
Measurement range Standard measurement range / scale markings: -30 … +30 °C. Other ranges possible upon request. Switch differential adjustable: ±1-10% FSR.
Outputs High power relay contact max. 15 Amp. @ 230 VAC.
Power Standard 230 VAC – 50/60 Hz, optional in 24 VDC (ask for the suitable versions).
Accuracy ± 1°C.
IP-norm IP44 (with rotary knob on front), IP65 (with internal set point-trimmer).
Dimensions
Options (for supplement)
  • Customer-specific / non-standard measurement range.
  • Customer-specific / non-standard supply voltage.
  • Front plate with own logo, company name or measurement unit.
DOCUMENTATION

• Brochure
• Example of switch functions (Dutch)
• Examples of switch functions (English)

ORDERING

The delivery of standard types from stocks and customer-specific versions can be within a few days.In view of the large number of versions and options for orders you can contact our sales department tel. +31 50-501 37 45 or by email:
sales@rstechnics.nl

LC05 standard thermostat

icon-lc05-thermostat

icon-lc05-thermostat

Standard industrial thermostat with rotary knob on front, permanent switch differential, relay contact max. 3 Amp. @ 230 VAC.

DESCRIPTION

The LC-thermostat series are compact professional thermostats for regulating temperature in cooling and freezing technology for a large number of applications. The measurement is based on the highly stable and accurate PT100 sensor. Various standard versions, ranges and housings are available for the various applications. We can of course provide you with comprehensive advice regarding suitable sensors. In addition to the standard versions it is possible to supply a thermostat in a customer-specific range or version. Attractive discounts apply to larger series.

SPECIFICATIONS
Types LC-05: standard thermostat in plastic housing.
Description Thermostat in plastic housing, connection via 6.3mm Fastons. Rotary knob at front, specially for cool/freeze applications. Supplied incl. mounting brackets for wall mounting.
Possible applications
  • Industrial applications.
  • Process control.
  • Machine construction.
  • Coffee machines.
  • Frost protection.
  • Cool/Freeze display cases.
Measurement system PT100 – IEC60751-3 lead.
Measurement range Standard measurement range / scale markings:2…+10 °C, 30…60°C or 0…100°C. Other ranges possible upon request. Switch differential: ±1% FSR.
Outputs Relay contact max. 3 Amp. @ 230 VAC.
Power Standard 230 VAC – 50/60 Hz, optional in 24 VDC (ask for the suitable versions).
Accuracy ± 1°C
IP-norm IP44
Dimensions
Options (for supplement)
  • Customer-specific / non-standard measurement range.
  • Customer-specific / non-standard supply voltage.
  • Front plate with own logo, company name or measurement unit.
DOCUMENTATION

• Brochure
Example switch functions (Dutch)
Examples switching functions (English)

ORDERING

The delivery of standard types from stocks and customer-specific versions can be within a few days. In view of the large number of versions and options for orders you can contact our sales department tel. +31 50-501 37 45 or by email:
sales@rstechnics.nl