PR Electronics 5333D – Head-mounted transmitter – ATEX – PT100

PR 5333D

PR 5333D

2-wire PRetop programmable head mounting transmitter
CSA+FM+ATEX II 1 G D, EAC R approval

Input: RTD, PT100
Output: 4-20 mA

DESCRIPTION

Temperature head mounted transmitters built into a connection head of a temperature sensor are in essential the best possible sollution if process temperature measurement with conversion and separation of RTD or TC sensor signals to analog signals is desired. There are also versions available with HART® signal and suitable for connection to PROFIBUS® PA and FOUNDATION™ Fieldbus, or constructions suitable for DIN rail mounting.

The assortment features rapid response times, splitter functions, RTD cable compensation, automatic CJC, auto-calibration, sensor fault detection and full programmability.

For every thinkable temperature measurement we have always the best solution. The transmitters are delivered pre-programmed and according to the desired measurement range and measurement system.

DOCUMENTATION

• Brochure

ORDERING

Delivery from stock of standard types and programmed according to your data.
In view of the large number of versions and options for ordering you can contact our sales department tel. 050-501 37 45 of per email: 
sales@rstechnics.nl

PR Electronics 5333A – Head-mounted transmitter – PT100

PR 5333A

PR 5333A

2-wire PRetop programmable head mounting transmitter

Input: RTD, PT100
Output: 4-20 mA

DESCRIPTION

Temperature head mounted transmitters built into a connection head of a temperature sensor are in essential the best possible sollution if process temperature measurement with conversion and separation of RTD or TC sensor signals to analog signals is desired. There are also versions available with HART® signal and suitable for connection to PROFIBUS® PA and FOUNDATION™ Fieldbus, or constructions suitable for DIN rail mounting.

The assortment features rapid response times, splitter functions, RTD cable compensation, automatic CJC, auto-calibration, sensor fault detection and full programmability.

For every thinkable temperature measurement we have always the best solution. The transmitters are delivered pre-programmed and according to the desired measurement range and measurement system.

DOCUMENTATION

• Brochure

ORDERING

Delivery from stock of standard types and programmed according to your data.
In view of the large number of versions and options for ordering you can contact our sales department tel. 050-501 37 45 of per email: 
sales@rstechnics.nl

CH100Xa – Compost, hay combustion thermometer

Hooibroei1

Hooibroei1

Insert thermometer especially for example compost, hay spontaneous combustion, etc.

DESCRIPTION

RS Technics supplies a unique feature insert thermometer especially for e.g. compost, hay spontaneous combustion, grain etc. This meter has a sturdy handle that allows you to exert force when inserting.

SPECIFICATIONS
Types CH100Xa: Compost meter – hay spontaneous combustion meter. Measurement range 0-100°C. Housing diameter 100 mm, insert length 2 metres, diameter 12 mm, with handle and sharp point.
Description Stainless steel thermometer.
Possible applications
  • Horiculture
  • Agriculture.
Measurement system Mechanic thermometer.
Measurement range As requested with order, in consultation with our sales department
Outputs Optional: relay contacts min/max
Power
Accuracy ± 1% FSR
IP-norm IP65
Dimensions Housing standard in 63, 100 or 160 mm diameter
insert length, diameter and process connection as requested
Options (for supplement)
  • Glycerine filling.
  • Relay contacts min/max.
  • Digital read out.

 

DOCUMENTATION

• Brochure
• Manual

 

ORDERING

The delivery of standard types from stocks and customer-specific versions can be within a few days. In view of the large number of models and options for orders you can contact our sales department tel. +31 50-501 37 45 or by email:
sales@rstechnics.nl

 

9400 – Robust pressure transmitter

9400-robust pressure transmitter

9400-robust pressure transmitter

Robust industrial pressure transmitter with watertight stainless steel connection head.

DESCRIPTION

The 9400 series Pressure transmitter is an industrial and very robust pressure transmitter fitted with a connection head turned from solid materials and has a screw cap with O-ring seal. The test cell is made from ceramic material that is resistant to most process media The test cell is sealed as standard with an O-ring of VITON or upon request of other materials. For sanitary applications this pressure transmitter can be fitted with a welded stainless steel membrane. Process connection is standard ½“BSP, other connections such as Triclamp, DIN, Dairy or Flange upon request.

SPECIFICATIONS
Types
  • 9400-1: Pressure transmitter with screw cap – IP68 – ¼“BSP external thread connection.
  • 9400-2: Pressure transmitter with screw cap – IP68 – ½“BSP external thread connection.
  • 9400-3: Pressure transmitter with screw cap – IP68 – connection for pipe-clamp connection (series 126) for pipe diameter 6, 8 or 10 mm, indicate upon delivery.
  • 9410-1: Pressure transmitter with bayonet head – IP65 – ¼“BSP external thread connection.
  • 9410-2: Pressure transmitter with bayonet head – IP65 – ½“BSP external thread connection.
Possible applications
  • General industry.
  • Heavy industryClimate control.
  • Foodstuffs industry.
Measurement element Ceramic pressure cell with ring seals.
Output Signal
accuracy Supply voltage 
4…20 mA.
1% FSR.
4…26 VDC.
Measurement range 0…1 Bar to 0…600 Bar, indicate with order.
Materials Fully in stainless steel-304. Seal of the ceramic test cell with O-ring in material VITON.
Dimensions diameter approx. 65 mm, length approx. 140 mm.
Process connection Refer to type numbers for the desired version
or customer-specific as requested with order, including BSP and NPT connections.
Connection cable Screw connection in the connection head is supplied without cable.
IP-norm  IP-68.
Options 
(for supplement) 
  • Customer specific connection.
  • O-ring seal in other materials for various (aggressive) process media.
DOCUMENTATION

• Brochure
• Further information about dimensions, connection and cables is given on the Support pages.

ORDERING

The delivery of standard types from stocks and customer-specific versions can be within a few days. In view of the large number of versions and options for orders you can contact our sales department tel. +31 50-501 37 45 or by email:
sales@rstechnics.nl

Mechanical stainless steel manometers

icon-Stainless steel-manometer

icon-Stainless steel-manometer

Mechanical stainless steel Manometers in various sizes, measurement ranges and various process connections available.

DESCRIPTION

In addition to the electronic Pressure transmitters, RS Technics supplies a complete package of stainless steel manometers, available in four different sizes. All standard measurement ranges are available. Thanks to the completely stainless steel construction in IP65 the meters are ideal for applications in most industrial situations. The manometers can be filled with Glycerine for environmental vibration damping.
As option the meter can be fitted with built-in Min/Max switch contacts or a 4-20mA pressure transmitter. In addition to the screw-in manometers, there are also membrane manometers and models with a chemical seal available upon request.

SPECIFICATIONS
Types
  • M63.1: housing diameter 63 mm, process connection ¼“BSP.
  • M100.1: housing diameter 100 mm, process connection ½“BSP.
  • M160.1: housing diameter 160 mm, process connection ½“BSP.
  • M250.1: housing diameter 250 mm, process connection ½“BSP.
Description Stainless steel manometer.
Possible applications
  • General industry.
  • Machine construction.
  • Shipping.
Measurement system Mechanical manometer.
Measurement range As requested with order, in consultation with our sales department.
Outputs Optional: relay contacts min/max.
Power
Accuracy ± 1% FSR
IP-norm IP65
Dimensions Housing standard in 63, 100, 160 or 250 mm diameter. Insert length, diameter and process connection as requested.
Options (for supplement)
  • Glycerine filling
  • Relay contacts min/max
  • Built-in 4-20 mA pressure transmitter
  • Stainless steel rear flange for wall mounting
  • Stainless steel front flange for panel installation
DOCUMENTATION

• Brochure
• Manual

ORDERING

The delivery of standard types from stocks and customer-specific versions can be within a few days. In view of the large number of models and options for orders you can contact our sales department tel. +31 50-501 37 45 or by email:
sales@rstechnics.nl

3010 – Screw-in pressure transmitter

3010-pressure transmitter-screw-in

3010-pressure transmitter-screw-in

Screw-in pressure transmitter in various standard measurement ranges

DESCRIPTION

The 3010 series pressure transmitter is a cylindrical screw-in pressure transmitter with a DIN connector 43650 on top. The test cell is made from ceramic material that is resistant to most process media. The process connection is standard ½“BSP. In addition to the 4-20mA output signal, 0-20mA and 0-10Vdc are also available upon request. Contact us for information about our stocks!

SPECIFICATIONS
Types
  • 3010-3: Pressure transmitter with DIN-connector – ½“BSP external thread connection. Measurement range from 0…1 Bar to 0…160 Bar, give details with order.
  • 3010-5: Pressure transmitter with DIN-connector – ½“BSP external thread connection. Measurement range as of 0…100 Bar and higher, give details with order.
  • 3010-6: Pressure transmitter with DIN-connector – ½“BSP external thread connection. Measurement range as of vacuum -1…+9 Bar, give details with order.
Possible applications
  • General industry.
  • Climate control.
  • Foodstuffs industry.
Measurement element Ceramic pressure cell with ring seals.
Output Signal
accuracy Supply voltage 
4…20 mA-DC.                                                                                     ±0,5% FSR.                                                                                             14…26 VDC.
Measurement range 0…250 mBar to 0…600 Bar, compound ranges upon request. 
Materials Solid stainless steel-304.
Dimensions Diameter approx. 40 mm, length approx. 120 mm.
Process connection Refer to type numbers for the desired version.
Connection cable Valve connector.
IP-norm  IP-65.
Options 
(for supplement) 
  • Version in absolute pressure.
  • Reducing nipple to connection.
  • ¼“BSP external thread.
DOCUMENTATION

• Brochure
• Further information about dimensions, connection and cables is given on the Support pages.

ORDERING

The delivery of standard types from stocks and customer-specific versions can be within a few days. In view of the large number of versions and options for orders you can contact our sales department tel. +31 50-501 37 45 or by email:
sales@rstechnics.nl

Mechanical stainless steel thermometers

icon-stainless steel-thermometer

icon-stainless steel-thermometer

Mechanical stainless steel Thermometers in various sizes, measurement ranges and various process connections available.

DESCRIPTION

RS Technics supplies a complete package of mechanical stainless steel thermometers, available in three different sizes of housing and with all available insert lengths and process connections. All standard measurement ranges are available. In addition an Any-Angle model is available whereby you can set the reading angle yourself. As option the meters can be fitted with Min/Max-switch contacts and even a digital read out.

SPECIFICATIONS
Types
  • T2063.1: housing diameter 63 mm, insert length 100 mm.
  • T2100.1: housing diameter 100 mm, insert length100 mm.
  • T2160.1: housing diameter 160 mm, insert length 100 mm.
  • T2063.2: Any-angle, housing diameter 63 mm, insert length 100 mm.
  • T2100.2: Any-angle, housing diameter 100 mm, insert length100 mm.
  • T2160.2: Any-angle, housing diameter 160 mm, insert length100 mm.
Description Stainless steel thermometer.
Possible applications
  • General industry.
  • Machine construction.
  • Agriculture.
Measurement system Mechanic thermometer.
Measurement range As requested with order, in consultation with our sales department
Outputs Optional: relay contacts min/max
Power
Accuracy ± 1% FSR
IP-norm IP65
Dimensions Housing standard in 63, 100 or 160 mm diameter
insert length, diameter and process connection as requested
Options (for supplement)
  • Glycerine filling.
  • Relay contacts min/max.
  • Digital read out.

 

DOCUMENTATION

• Brochure
• Manual

 

ORDERING

The delivery of standard types from stocks and customer-specific versions can be within a few days. In view of the large number of models and options for orders you can contact our sales department tel. +31 50-501 37 45 or by email:
sales@rstechnics.nl

 

175 – Stainless steel level sensor

175 niveausensor

175 niveausensor

Stainless steel Level sensor for detecting fluid levels. Available in many customer-specific versions.

DESCRIPTION

The 175 series is made of stainless steel-316 with a stainless steel-304 connection head with bayonet cap and welded stainless steel cable swivel feed-through PG-11. This sensor can be fitted with 1 or 2 electrodes and is intended for detecting liquid levels. The electrodes are made according to the desired length. Give details with order. The photo shows a level sensor with 2 electrodes and swivel connection, but of course many other variations are possible!

SPECIFICATIONS
Types 175: Level sensor. 
Length, diameter and process connection as requested with order.
Possible applications
  • General industry.
  • Foodstuffs industry.
  • Laboratories.
  • Liquid handling.
Measurement element Insulated electrodes.
Measurement system Idem.
Measurement range Depending on the chosen version and installation location.
Materials Stainless steel-316.
Dimensions As requested with order. Ask about the many possibilities.
Process connection As requested with order. Available in various connections.
Connection cable Delivered without cable.
IP-norm  IP-65.
Options 
(for supplement) 
  • Extra electrode pins.
  • Electronic Level controller for regulating and detecting the level sensor.
DOCUMENTATION

• Brochure
• Further information about dimensions, connection and cables is given on the Support pages.

ORDERING

The delivery of standard types from stocks and customer-specific versions can be within a few days. In view of the large number of versions and options for orders you can contact our sales department tel. +31 50-501 37 45 or by email:
sales@rstechnics.nl

177HDS – Humidity sensor for wall mounting

177wd-wall sensor-stainless steel

177wd-wall sensor-stainless steel

Humidity sensor with mounting plate for wall mounting.

DESCRIPTION

The 177HDS is a fully stainless steel sensor with a cut away measuring point and has  a rear flange for wall mounting.  This sensor is specifically intended for measuring the relative air humidity.

 

SPECIFICATIONS
Types
  • 177HDS: Sensor with rear flange for RH measurement 20-95%, output 0-100% = 4-20mA
  • 177HDSPT: Combination sensor Temperature PT100/3L and RH measurement 0-100%=4-20mA.

Length, diameter, and measurement system as requested with order.

Possible applications
  • Cool/Freeze cells.
  • Computer rooms/Machine rooms.
  • Storage spaces.
Measurement element PT100
Measurement system In 3-lead technology.
Temperature range Standard range up to a max. of 300°C. However this is very much dependent on the chosen materials, connection cables and construction.
For the correct version, please feel free to contact us.
Materials Stainless steel-316. 
Dimensions As requested with order.
Process connection Fixed mounting plate for wall mounting.
Connection cable Screw connection in the connection head, so supplied without cable.
IP-norm  IP-65 (the cut away measuring section of the 177 air probe is not watertight).
Options 
(for supplement) 
  • Head transmitter TRM33A, measurement range as requested.
  • Measurement system PT100 1/3 Din selection.
  • Measurement system PT100 1/5 Din selection.
  • Measurement system PT100 1/10 Din selection.

 
 

DOCUMENTATION

• Brochure
• Further information about dimensions, connection and cables is given on the Support pages.

ORDERING

The delivery of standard types from stocks and customer-specific versions can be within a few days. In view of the large number of versions and options for orders you can contact our sales department tel. +31 50-501 37 45 or by email:
sales@rstechnics.nl

149HDS – Humidity sensor in aluminium housing

147wd-air probe-wall mounting-alu

147wd-air probe-wall mounting-alu

Humidity sensor in robust aluminium design.

DESCRIPTION

The 149HDS is a sensor in aluminium housing with a cut away stainless steel measuring point.  This sensor is specifically intended for measuring relative air humidity. 

SPECIFICATIONS
Types
  • 149HDS: Humidity sensor  in aluminium housing 20-95%, output 0-100% = 4-20mA
  • 149HDSPT: Combination sensor Temperature PT100/3L and RH measurement 0-100%= 4-20mA
Possible applications
  • Cool/Freeze cells.
  • Computer rooms/Machine rooms.
  • Storage spaces.
Measurement element PT100
Measurement system 3-lead technology.
Temperature range For the correct version, please feel free to contact us.
Materials Housing: aluminium, sensor: stainless steel-316. 
Dimensions Housing: – ,Sensor: As requested with order.
Process connection Housing suitable for wall mounting.
Connection cable Screw connection in the housing is supplied without cable.
IP-norm  IP-65 
(the cut away measuring section of the 149 air probe is not watertight).
Options 
(for supplement) 
  • Measurement system PT100 1/3 Din selection.
  • Measurement system PT100 1/5 Din selection.
  • Measurement system PT100 1/10 Din selection.

 
 

DOCUMENTATION

• Brochure
• Further information about dimensions, connection and cables is given on the Support pages.

ORDERING

The delivery of standard types from stocks and customer-specific versions can be within a few days. In view of the large number of version and options for orders you can contact our sales department tel. +31 50-501 37 45 or by email:
sales@rstechnics.nl