Posts

Posted on

DTM55 – Precision handthermometer – incl. traceable calibration certificate

dtm55 bew cert

dtm55 bew cert

Very accurate digital hand-held thermometer for calibration and control tasks including traceable calibration certificate. Accuracy over the entire measurement range ±0.2°C. Standard with a 5 year guarantee!

DESCRIPTION

The DTM55 is a very accurate hand-held thermometer for all the usual calibration and control tasks. This meter is a robust version manufactured from modern electronic components, which gives it a standard 5 year factory guarantee! With a standard 9 volt battery more than 10,000 measurements are possible. In order to preserve battery life the meter switches off automatically after several minutes. The DTM55 is supplied including a traceable calibration certificate that can be checked and renewed annually.

NEW: the DTM55 is now also available in a version that measures Cryogenic temperatures in for example liquid nitrogen. Specially developed for laboratories, blood banks, hospitals, AI stations etc. Delivery including traceable calibration certificate (to -20°C) and hand-held sensor according to choice. Can be used for a temperature range from -190 to +50 °C.

SPECIFICATIONS
Types
  • DTM55: Precision hand-held thermometer incl. sensor and traceable calibration certificate, range -59.9..+199.9°C.
  • DTM55CRYO: Precision hand-held thermometer incl. sensor and traceable calibration certificate, range -190.0..+50.0°C.

Sensor of your choice:

  • Hand-held sensor with rounded flat point and with 1 meter curled cable.
  • Hand-held sensor with rounded flat point and with 1 meter straight cable.
  • Hand-held sensor with sharp bullet-shaped point and with 1 meter curled cable.
  • Hand-held sensor with sharp bullet-shaped point and with 1 meter straight cable.
  • Hand-held sensor for air temperature measurement and with 1 meter curled cable.
  • Hand-held sensor for surface temperature measurement and with 1 meter curled cable.
  • Hand-held sensor with thinned sharp bullet-shaped point, cable bending protection and with 1 meter straight cable.
Description Digital precision thermometer with 5 year guarantee! 
Possible applications
  • Calibration and Certification.
  • HACCP control.
  • Service tasks.
Measurement system PT100 – IEC60751/3-lead.
Measurement range Standard -59.9… +199.9°C. Customer-specific range possible.
Outputs –
Power 9V battery.
Accuracy DTM55: ± 0.2°C. DTM55CRYO: ± 0.5°C.
IP-norm IP52.
Dimensions –
Options (for supplement)
  • Test lead for checking existing PT100 elements.
  • Sturdy plastic case with space for instrument and sensor.
  • Calibration plug for checking the instrument at 0 °C.
  • Calibration plug for checking the instrument at 100 °C.
  • (annual) Re-calibration of the instrument including new calibration certificate.
DOCUMENTATION

• Brochure
• Manual (Dutch)
• User manual (English)

ORDERING

The delivery of standard types from stocks and customer-specific versions can be within a few days. In view of the large number of versions and options for orders you can contact our sales department tel. +31 50-501 37 45 or by email:
sales@rstechnics.nl

Posted on

DTM65 – Digital thermometer

dtm65 bew

dtm65 bew

Accurate digital hand-held thermometer for example control and service tasks. Accuracy over entire measurement range ±0.5°C. Standard with a 5 year guarantee!

DESCRIPTION

The DTM65 is the economically priced version of the DTM series of hand-held thermometers. This meter is a robust version manufactured from modern electronic components, which gives it a standard 5 year factory guarantee! With a standard 9-Volt battery more than 10,000 measurements are possible. After a few minutes the meter switches off automatically to save battery life. As an option the DTM65 can be delivered including a traceable calibration certificate. For higher measurement accuracy we refer you to the DTM55 or DTM75.

SPECIFICATIONS
Types DTM65: Digital hand-held thermometer incl. sensor, range -59.9..+199.9°C.

Sensor of your choice:

  • Hand-held sensor with rounded flat point and with 1 meter curled cable.
  • Hand-held sensor with rounded flat point and with 1 meter straight cable.
  • Hand-held sensor with sharp bullet-shaped point and with 1 meter curled cable.
  • Hand-held sensor with sharp bullet-shaped point and with 1 meter straight cable.
  • Hand-held sensor for air temperature measurement and with 1 meter curled cable.
  • Hand-held sensor for surface temperature measurement and with 1 meter curled cable.
  • Hand-held sensor with thinned sharp bullet-shaped point, cable bending protection and with 1 meter straight cable.
Description Accurate digital hand-held thermometer with 5 year guarantee!
Possible applications
  • HACCP control.
  • Foodstuffs industry.
  • General industry.
  • Service tasks.
Measurement system PT100 – IEC60751/3-lead.
Measurement range Standard -59.9… +199.9°C. Customer-specific range possible.
Outputs –
Power 9V battery.
Accuracy ± 0.5°C.
IP-norm IP52.
Dimensions –
Options (for supplement)
  • Test lead for checking existing PT100 elements.
  • Sturdy plastic case with space for instrument and sensor.
  • Calibration plug for checking the instrument at 0 °C.
  • Calibration plug for checking the instrument at 100 °C.
  • (Re-) calibration of the instrument including new calibration certificate.
DOCUMENTATION

• Brochure
• Manual (Dutch)
• User manual (English)

ORDERING

The delivery of standard types from stocks and customer-specific versions can be within a few days. In view of the large number of versions and options for orders you can contact our sales department tel. +31 50-501 37 45 or by email:
sales@rstechnics.nl

Posted on

TM16 – Temperature Monitor for 16 channels

icon-tm16-temperature-monitor

icon-tm16-temperature-monitor

The TempMonitor-16 is the solution for displaying and monitoring a maximum of 16 measurement signals on 1 central display unit. By means of the push buttons the desired measurement value can be shown on the display, and the settings for the monitoring contact can be changed.

DESCRIPTION

The TempMonitor-16 is a compact monitor unit specially developed for simultaneously monitoring a maximum of 16 measurement signals. The TempMonitor-16 has two alarm contacts. The alarm function can be set separately for each measurement channel. By means of the LCD display and the push buttons on the front the measurement value of each channel can be displayed. If an alarm is given the measurement value of the channel in question is automatically displayed and a notification follows with the Relay contact and indication via LED and internal acoustic Buzzer. Fail-safe alarm contact with detection of sensor faults. This unit is intended for panel installation.

SPECIFICATIONS
Types TM16: Temperatur Monitor with 16 inputs.
Description Programmable 16-channel temperature monitor in housing for panel installation NG144x72mm. LCD-display 2×16 characters with background lighting. 2 Alarm relay max. 3 Amp @ 250 VAC. All connections with screw/insert connectors. Supplied including connection and mounting materials.
Possible applications
  • Industrial applications.
  • Process control.
  • Shipping.
  • Machine construction.
Measurement system As requested with order:

  • PT100 – IEC60751/3-lead
  • Thermocouple J or K
  • Voltage 0-10VDC
  • Current 4-20 mA
Measurement range Available measuring inputs, all 16 channels are in the same range:

  • PT100: -50…+200 °C and 0…600 °C.
  • Thermocouple-J: 0…500 °C.
  • Thermocouple-K: 0…1200 °C.
  • Current: 0…100 °C, Display range adjustable.
  • Voltage: 0…100 °C, Display range adjustable
Outputs Two relay contacts, potential-free contact N.O., max. 3 Amp @ 250 VAC.
Power Standard 230 VAC – 50/60 Hz, optional in 24 VDC.
Accuracy ± 1% FSR.
IP-norm IP54 (front/panel side).
Dimensions Panel installation 144×72, depth 110 mm.
Options (for supplement)
  • Front plate with own logo, company name or measurement unit
  • Installed in a cabinet or housing for wall mounting
DOCUMENTATION

• Brochure
• Manual and connection diagram

ORDERING

The delivery of standard types from stocks and customer-specific versions can be within a few days.In view of the large number of versions and options for orders you can contact our sales department tel. +31 50-501 37 45 or by email:
sales@rstechnics.nl

Posted on

SW96 – Switchbox with indicator

icon-sw96-switch box

icon-sw96-switch box

Save on loose indicators! Use a rotary knob to select one of the 6 input values, which then is shown on the joint display. Panel installation 96x96mm, suitable for many standard measurement ranges.

DESCRIPTION

RS Technics has developed a compact pre-selection unit for reading out a maximum of 6 measurement signals from 1 display. This switch box can be supplied in two versions, with or without built-in indicator. The wiring is connected on the rear using screw connectors. Fitted with a high-quality 6-position rotary switch with gold contacts.

Advantages:

  • Reading out on one central point
  • Quick indication of processes
  • Ease of use and operation
  • Space-saving and financially economical
SPECIFICATIONS
Types SW96: switch box with built-in indicator.
Description Pre-selection switch unit in DIN housing for panel installation. Supplied incl. mounting brackets and connection components.
Possible applications
  • Industrial applications.
  • Process control.
  • Shipping.
  • Machine construction.
Measurement system As requested with order:

  • PT100 – IEC60751/3-lead
  • Thermocouple J or K
  • Voltage 0-1 VDC or 0-10 VDC
  • Current 0-20 mA or 4-20 mA.
Measurement range 6 channels with identical measurement inputs. Standard range of the above mentioned measurement systems. Ask about the possibilities for standard and customer-specific options.
Outputs  
Power
  • Standard 230 VAC – 50/60 Hz
  • Optional in 24 V AC / DC.
Accuracy ± 1% FSR.
IP-norm IP54 (front/panel side).
Dimensions Panel installation 96x96mm, depth 110 mm.
Options (for supplement)
  • Customer-specific / non standard measurement range.
  • Customer-specific supply voltage.
  • Front plate with own logo, company name or measurement unit.
DOCUMENTATION

• Brochure
• Manual
• Connection diagram

ORDERING

The delivery of standard types from stocks and customer-specific versions can be within a few days.In view of the large number of models and options for orders you can contact our sales department tel. +31 50-501 37 45 or by email:
sales@rstechnics.nl

Posted on

SW6 – Switch box

icon-sw6-switch box

icon-sw6-switch box

Save on loose indicators! Use a rotary knob to select one of the 6 input values, which then is shown on the joint display. Panel installation 96x96mm, suitable for many standard measurement ranges.

DESCRIPTION

RS Technics has developed a compact pre-selection unit for reading out a maximum of 6 measurement signals from 1 display. This switch box can be supplied in two versions, with or without built-in indicator. The wiring is connected on the rear using screw connectors. Fitted with a high-quality 6-position rotary switch with gold contacts.

Advantages:

  • Reading out on one central point
  • Quick indication of processes
  • Ease of use and operation
  • Space-saving and financially economical
SPECIFICATIONS
Types SW6: switch box unit with 6 inputs to one output.
Description Pre-selection switch unit in DIN housing for panel installation. Supplied incl. mounting brackets and connection components.
Possible applications
  • Industrial applications.
  • Process control.
  • Shipping.
  • Machine construction.
Measurement system As requested with order:

  • PT100 – IEC60751/3-lead
  • Thermocouple J or K
  • Voltage 0-1 VDC or 0-10 VDC
  • Current 0-20 mA or 4-20 mA.
Measurement range 6 channels with identical measurement inputs. All standard ranges of the above-mentioned measurement systems. Ask about the possibilities for customer-specific options.
Outputs Selection of 6 measurement inputs to 1 output. Connection via screw connectors on rear.
Power –
Accuracy ± 1%.
IP-norm IP54 (front/panel side).
Dimensions Panel installation 96x96mm, depth 110 mm.
Options (for supplement)
  • (thermocouple) Connector in front plate for connecting output signal.
  • Customer-specific / non-standard measurement range.
  • Front plate with own logo, company name or measurement unit.
DOCUMENTATION

• Brochure
• Manual
• Connection diagram

ORDERING

The delivery of standard types from stocks and customer-specific versions can be within a few days. In view of the large number of versions and options for orders you can contact our sales department tel. +31 50-501 37 45 or by email:
sales@rstechnics.nl

Posted on

Eurotherm 3200 serie – High performance controllers

3200 eurotherm

3200 eurotherm

Highend Eurotherm high performance PID controller with quickstart and textmessaging.
Suitable for panel installation, deliverable in many customer-specific measurementranges.

DESCRIPTION

The controller of the serie 3200 is a high performance PID controller with quickstart en textmessaging.

The controller offers many advanced features such as temperature, fault detection, timer, setpoint programming and a recipe function. These are easy to configure with the PC through a wizard configuration tool.
You can use the simple quickstart code to configure all the essential functions to manage your process, such as: type of sensor, measurement range, control options and alarm alerts.

Features:

  • 8 Segment programmer
  • Heater failure detection
  • Modbus communication and Modbus SP retransmission / analog retransmission
  • Understandable helptext and scrolling text messages
  • Internal timer and setpoint programming, suitable for simple timebased applications
  • Detection and display of temperature failures and integral current monitoring.
SPECIFICATIONS
Types
  • 3208: PID controller 48x96mm (vertical model)
  • 32H8: PID controller 96x48mm (horizontal model)
  • 3204: PID controller 96x96mm

Outputs according to the following configurations:
Logic / Relay / DC-output / Triac

  • L+R+R / R+R+R / L+L+R
  • L+R+D / R+R+D / L+T+R / L+L+D
  • D+D+D / T+T+D
  • D+R+D / T+T+R / L+T+D / L+D+D
Description Programmable procescontroller in DIN case for wall mounting. 
Numerous switching functions and freely adjustable switching points. 
Measurement input optionally, ask for the possibilities or the datasheet. 
LED display in green with single or double display measurement.
Delivery including mounting brackets and connection material.
Posssible applications
  • Plastics extrusion
  • Hot-runner
  • Thermal forming
  • Ovens & chillers
  • Stress relieving
Measurement system
  • PT100 
  • Thermocouple J of K 
  • Voltage 
  • Current
  • Digital
Measurement range Free configurable
Outputs
  • Relay (2A, 264VAC
  • Logic (12VDC, 44mA)
  • Triac (0,75A, 264VAC)
  • DC (0/4 – 20mA)
  • TX (PS 24VDC)
Power
  • 100-230VAC – 50/60 Hz
  • 24VAC / 24VDC
Accurancy ± 1% FSR 
IP-norm  IP40 (front/panel side) 
Dimensions Panel installation in the dimensions 96×48, 48×96 and 96×96 mm
Options 
(for Supplement) 
  • Program option 1×8 segments (CP)
  • Extra alarm output (AA relay)
DOCUMENTATION

• Brochure
• Manual
• Connection diagram

ORDER

The delivery of standard types from stocks and customer-specific versions can be within a few days. In view of the large number of versions and options for orders you can contact our sales department tel. +31 50-501 37 45 or by email:
sales@rstechnics.nl

Posted on

Eurotherm 2200 series – Procescontrollers

2200 eurotherm

2200 eurotherm

High-end  Eurotherm procescontroller with unique auto-tune function for the most optimal control in just a few steps. Suitable for panel installation, available in many customer-specific measurement ranges.

DESCRIPTION

The controller of the serie 2200 is a versatile, very stable temperature and process controller with auto tuning.

The controller is available in the following dimensions:
1/6DIN (48x48mm)
1/8DIN (48x96mm)
1/4DIN (96x96mm)

The controller has a modular hardware construction with the option: 1 control output, 2 alarm relays and a communication module. The hardware is configurable for heating, cooling or alarm.

The modular heating and cooling outputs can optionally be equipped with 1 or 2 alarm relay outputs. The 2208 and 2204 have 2 digital inputs for selecting auto / manual control, standby mode, 2nd setpoint or alarm confirmation. The load current can be displayed and errors or shortcuts can be detected.

SPECIFICATIONS
Types
  • 2216: PID controller 48x48mm executed with 1x alarm relay output
  • 2208: PID controller 48x96mm executed with 2x alarm relay outputs
  • 2204: PID controller 96x96mm executed with 2x alarm relay outputs
Description Programmable procescontroller in DIN case for wall mounting. 
Numerous switching functions and freely adjustable switching points. 
Measurement input optionally, ask for the possibilities or datasheet. 
LED display in green with single or double display measurement.
Delivery including mounting brackets and connection matirial
Possible applications
  • Extrusions
  • Ovens and boilers
  • Valve position control
  • Cooling cells and heating applications
  • Packaging machines
  • Food industry
Measurementsystem
  • PT100 
  • Thermocouple J or K 
  • Voltage
  • Current
Measurementrange Free configurable
Outputs
  • Relais
  • Logic
  • Traic
  • Motorized valve output

Maximum 4 outputs, including 2 modulair outputs.
Power
  • 100-240VAC – 50/60 Hz
  • 24VAC / 24VDC
Accurancy ± 1% FSR 
IP-norm  IP40 (front/paneelzijde) 
Dimensions Panel installation in the dimensions 48×48, 48×96 and 96×96 mm
Options 
(for supplement) 
  • R1 – Module for extra relais output
  • L1 – Module logic output
  • C1 – Module contact input
  • D3 – Module DC-mA output
  • D3A – Module DC-mA retransmission output
DOCUMENTATIE

• Brochure
• Manual
• Connection diagram

BESTELLEN

The delivery of standard types from stocks and customer-specific versions can be within a few days. In view of the large number of versions and options for orders you can contact our sales department tel. +31 50-501 37 45 or by email:
sales@rstechnics.nl

Posted on

SI96 – Indicator

icon-si96-indicator

icon-si96-indicator

Standard digital indicators for displaying temperature and process values. Panel installation, available in many standard or customer-specific measurement ranges.

DESCRIPTION

The SI-indicators are standard digital indicators for direct display of process values.  The indicator is supplied in a DIN housing for panel installation 96×48 mm (SI96), including mounting and connection components. Standard with a red LED display, a green one is optional. Due to the internal universal input card a large number of input ranges are possible. The indicators can also be supplied completely installed in a cabinet, eventual with connection clamps and wiring.

SPECIFICATIONS
Types SI96: indicator panel installation 96×48 mm, display character height 13 mm.
Description Process indicator in DIN housing for panel installation. Measurement input with standard range or according to specification. Standard with a red LED display, 3.5 digit and character height 13 mm. A LED display in green colour is optional. Supplied incl. mounting brackets and connection components.
Possible applications
  • Industrial applications.
  • Process control.
  • Shipping.
  • Machine construction.
Measurement system As requested with order:

  • PT100 – IEC60751/3-lead
  • Thermocouple J or K
  • Voltage 0-1 VDC or 0-10 VDC
  • Current 0-20 mA or 4-20 mA.
Measurement range
  • PT100: -50… +199°C
  • Thermocouple: 0-500°C
  • Current/Voltage: 0.0 … 100.0%
  • Other ranges possible on request.
Outputs –
Power Standard 230 VAC – 50/60 Hz, optional in 12 V or 24 V AC / DC.
Accuracy ± 1% FSR.
IP-norm IP54 (front/panel side).
Dimensions Panel installation 96x48mm, depth 65 mm.
Options (for supplement)
  • Customer-specific / non standard measurement range.
  • Customer-specific / non standard supply voltage.
  • Display LEDs in green.
  • Front plate with own logo, company name or measurement unit.
DOCUMENTATION

• Brochure
• Manual and connection diagram

ORDERING

The delivery of standard types from stocks and customer-specific versions can be within a few days. In view of the large number of versions and options for orders you can contact our sales department tel. +31 50-501 37 45 or by email:
sales@rstechnics.nl

Posted on

SI48 – Indicator

icon-si48-indicator

icon-si48-indicator

Standard digital indicators for displaying temperature and process values. Panel installation, available in many standard or customer-specific measurement ranges.

DESCRIPTION

The SI-indicators are standard digital indicators for direct display of process values. The indicator is supplied in a DIN housing for panel installation 48×48 (SI48), including mounting and connection components. Standard with a red LED display, a green one is optional. Due to the internal universal input card a large number of input ranges are possible. The indicators can also be supplied completely installed in a cabinet, eventual with connection clamps and wiring.

SPECIFICATIONS
Types SI48: indicator panel installation 48×48 mm, display character height 10 mm.
Description Process indicator in DIN housing for panel installation. Measurement input with standard range or according to specification. Standard with a red LED display, 3.5 digit and character height 10 mm. A LED display in green colour is optional. Supplied incl. mounting brackets and connection components.
Possible applications
  • Industrial applications.
  • Process control.
  • Shipping.
  • Machine construction.
Measurement system As requested with order:

  • PT100 – IEC60751/3-lead
  • Thermocouple J or K
  • Voltage 0-1 VDC or 0-10 VDC
  • Current 0-20 mA or 4-20 mA.
Measurement range
  • PT100: -50… +199°C
  • Thermocouple: 0-500°C
  • Current/Voltage: 0.0 … 100.0%.
  • Other ranges possible on request.
Outputs –
Power Standard 230 VAC – 50/60 Hz, optional in 12 V or 24 V AC / DC.
Accuracy ± 1% FSR.
IP-norm IP54 (front/panel side).
Dimensions Panel installation 48x48mm, depth 110 mm.
Options (for supplement)
  • Customer-specific / non standard measurement range.
  • Customer-specific / non standard supply voltage.
  • Display LEDs in green.
  • Front plate with own logo, company name or measurement unit.
DOCUMENTATION

• Brochure
• Manual and connection diagram

ORDERING

The delivery of standard types from stocks and customer-specific versions can be within a few days. In view of the large number of versions and options for orders you can contact our sales department tel. +31 50-501 37 45 or by email:
sales@rstechnics.nl

Posted on

PI50 – Programmable indicator

Pi50a

Pi50a

Digital indicator with 2 or 4 programmable alarm contacts for display, monitoring and regulation of temperature and process values. Panel installation, available in many standard or customer-specific measurement ranges.

DESCRIPTION

The indicator of the serie PI50 has a 4-digit 14-segment LED display, which guaranteed a good vision. It is very easy to program the indicator with the front function keys and the clearly menu stucture. Installation goes very quickly, because each relais can be activated / deactivated independently. Sensor failures are directly displayed on the display or declared by a relais. The indicator is safely secured: the input, output and the powersupply are isolated (to a max of 2.3kVAC). The housing is in the standard DIN NG96x48mm size.

SPECIFICATIONS
Types
  • PI50-2B: output: 2x relais
  • PI50-2D: output: 2x relais + 1 analog
  • PI50-4B: output: 4x relais
  • PI50-4D: output: 4x relais + 1 analog
Description Programmable indicator in DIN housing NG96x48 mm. Two or four independent relay contacts with various possible switch functions and freely adjustable switch points. A selection of measurement inputs available, ask about the possibilities or for a data sheet. Standard with a red LED display, a LED display in green colour is optional. Supplied including mounting brackets.
Possible applications
  • Industrial applications.
  • Process control.
  • Shipping and offshore.
  • Machine construction.
Measurement system mA, V, PT100, R, TC
Measurement range Upon request.
Outputs
  • 2x of 4 x relais.
  • Optional analog output
Power Wide range: 24-230 VDC / VAC
Accuracy ± 0.1% FSR
IP-norm IP65
Dimensions Panel installation 96x48mm, depth 120 mm.
Options (for supplement) Display LEDs in green.
DOCUMENTATION

• Brochure
• Manual PI50 (English)

ORDERING

The delivery of standard types from stocks and customer-specific versions can be within a few days. In view of the large number of versions and options for orders you can contact our sales department tel. +31 50-501 37 45 or by email:
sales@rstechnics.nl