Author: Luuk Aalders

Posted on

3010 – Screw-in pressure transmitter

3010-pressure transmitter-screw-in

3010-pressure transmitter-screw-in

Screw-in pressure transmitter in various standard measurement ranges

DESCRIPTION

The 3010 series pressure transmitter is a cylindrical screw-in pressure transmitter with a DIN connector 43650 on top. The test cell is made from ceramic material that is resistant to most process media. The process connection is standard ½“BSP. In addition to the 4-20mA output signal, 0-20mA and 0-10Vdc are also available upon request. Contact us for information about our stocks!

SPECIFICATIONS
Types
  • 3010-3: Pressure transmitter with DIN-connector – ½“BSP external thread connection. Measurement range from 0…1 Bar to 0…160 Bar, give details with order.
  • 3010-5: Pressure transmitter with DIN-connector – ½“BSP external thread connection. Measurement range as of 0…100 Bar and higher, give details with order.
  • 3010-6: Pressure transmitter with DIN-connector – ½“BSP external thread connection. Measurement range as of vacuum -1…+9 Bar, give details with order.
Possible applications
  • General industry.
  • Climate control.
  • Foodstuffs industry.
Measurement element Ceramic pressure cell with ring seals.
Output Signal
accuracy Supply voltage 		 4…20 mA-DC.                                                                                     ±0,5% FSR.                                                                                             14…26 VDC.
Measurement range 0…250 mBar to 0…600 Bar, compound ranges upon request. 
Materials Solid stainless steel-304.
Dimensions Diameter approx. 40 mm, length approx. 120 mm.
Process connection Refer to type numbers for the desired version.
Connection cable Valve connector.
IP-norm  IP-65.
Options 
(for supplement) 
  • Version in absolute pressure.
  • Reducing nipple to connection.
  • ¼“BSP external thread.
DOCUMENTATION

• Brochure
• Further information about dimensions, connection and cables is given on the Support pages.

ORDERING

The delivery of standard types from stocks and customer-specific versions can be within a few days. In view of the large number of versions and options for orders you can contact our sales department tel. +31 50-501 37 45 or by email:
sales@rstechnics.nl

Posted on

Mechanical stainless steel thermometers

icon-stainless steel-thermometer

icon-stainless steel-thermometer

Mechanical stainless steel Thermometers in various sizes, measurement ranges and various process connections available.

DESCRIPTION

RS Technics supplies a complete package of mechanical stainless steel thermometers, available in three different sizes of housing and with all available insert lengths and process connections. All standard measurement ranges are available. In addition an Any-Angle model is available whereby you can set the reading angle yourself. As option the meters can be fitted with Min/Max-switch contacts and even a digital read out.

SPECIFICATIONS
Types
  • T2063.1: housing diameter 63 mm, insert length 100 mm.
  • T2100.1: housing diameter 100 mm, insert length100 mm.
  • T2160.1: housing diameter 160 mm, insert length 100 mm.
  • T2063.2: Any-angle, housing diameter 63 mm, insert length 100 mm.
  • T2100.2: Any-angle, housing diameter 100 mm, insert length100 mm.
  • T2160.2: Any-angle, housing diameter 160 mm, insert length100 mm.
Description Stainless steel thermometer.
Possible applications
  • General industry.
  • Machine construction.
  • Agriculture.
Measurement system Mechanic thermometer.
Measurement range As requested with order, in consultation with our sales department
Outputs Optional: relay contacts min/max
Power –
Accuracy ± 1% FSR
IP-norm IP65
Dimensions Housing standard in 63, 100 or 160 mm diameter
insert length, diameter and process connection as requested
Options (for supplement)
  • Glycerine filling.
  • Relay contacts min/max.
  • Digital read out.

 

DOCUMENTATION

• Brochure
• Manual

 

ORDERING

The delivery of standard types from stocks and customer-specific versions can be within a few days. In view of the large number of models and options for orders you can contact our sales department tel. +31 50-501 37 45 or by email:
sales@rstechnics.nl

 

Posted on

175 – Stainless steel level sensor

175 niveausensor

175 niveausensor

Stainless steel Level sensor for detecting fluid levels. Available in many customer-specific versions.

DESCRIPTION

The 175 series is made of stainless steel-316 with a stainless steel-304 connection head with bayonet cap and welded stainless steel cable swivel feed-through PG-11. This sensor can be fitted with 1 or 2 electrodes and is intended for detecting liquid levels. The electrodes are made according to the desired length. Give details with order. The photo shows a level sensor with 2 electrodes and swivel connection, but of course many other variations are possible!

SPECIFICATIONS
Types 175: Level sensor. 
Length, diameter and process connection as requested with order.
Possible applications
  • General industry.
  • Foodstuffs industry.
  • Laboratories.
  • Liquid handling.
Measurement element Insulated electrodes.
Measurement system Idem.
Measurement range Depending on the chosen version and installation location.
Materials Stainless steel-316.
Dimensions As requested with order. Ask about the many possibilities.
Process connection As requested with order. Available in various connections.
Connection cable Delivered without cable.
IP-norm  IP-65.
Options 
(for supplement) 
  • Extra electrode pins.
  • Electronic Level controller for regulating and detecting the level sensor.
DOCUMENTATION

• Brochure
• Further information about dimensions, connection and cables is given on the Support pages.

ORDERING

The delivery of standard types from stocks and customer-specific versions can be within a few days. In view of the large number of versions and options for orders you can contact our sales department tel. +31 50-501 37 45 or by email:
sales@rstechnics.nl

Posted on

177HDS – Humidity sensor for wall mounting

177wd-wall sensor-stainless steel

177wd-wall sensor-stainless steel

Humidity sensor with mounting plate for wall mounting.

DESCRIPTION

The 177HDS is a fully stainless steel sensor with a cut away measuring point and has  a rear flange for wall mounting.  This sensor is specifically intended for measuring the relative air humidity.

 

SPECIFICATIONS
Types
  • 177HDS: Sensor with rear flange for RH measurement 20-95%, output 0-100% = 4-20mA
  • 177HDSPT: Combination sensor Temperature PT100/3L and RH measurement 0-100%=4-20mA.

Length, diameter, and measurement system as requested with order.
Possible applications
  • Cool/Freeze cells.
  • Computer rooms/Machine rooms.
  • Storage spaces.
Measurement element PT100
Measurement system In 3-lead technology.
Temperature range Standard range up to a max. of 300°C. However this is very much dependent on the chosen materials, connection cables and construction.
For the correct version, please feel free to contact us.
Materials Stainless steel-316. 
Dimensions As requested with order.
Process connection Fixed mounting plate for wall mounting.
Connection cable Screw connection in the connection head, so supplied without cable.
IP-norm  IP-65 (the cut away measuring section of the 177 air probe is not watertight).
Options 
(for supplement) 
  • Head transmitter TRM33A, measurement range as requested.
  • Measurement system PT100 1/3 Din selection.
  • Measurement system PT100 1/5 Din selection.
  • Measurement system PT100 1/10 Din selection.

 
 

DOCUMENTATION

• Brochure
• Further information about dimensions, connection and cables is given on the Support pages.

ORDERING

The delivery of standard types from stocks and customer-specific versions can be within a few days. In view of the large number of versions and options for orders you can contact our sales department tel. +31 50-501 37 45 or by email:
sales@rstechnics.nl

Posted on

149HDS – Humidity sensor in aluminium housing

147wd-air probe-wall mounting-alu

147wd-air probe-wall mounting-alu

Humidity sensor in robust aluminium design.

DESCRIPTION

The 149HDS is a sensor in aluminium housing with a cut away stainless steel measuring point.  This sensor is specifically intended for measuring relative air humidity. 

SPECIFICATIONS
Types
  • 149HDS: Humidity sensor  in aluminium housing 20-95%, output 0-100% = 4-20mA
  • 149HDSPT: Combination sensor Temperature PT100/3L and RH measurement 0-100%= 4-20mA
Possible applications
  • Cool/Freeze cells.
  • Computer rooms/Machine rooms.
  • Storage spaces.
Measurement element PT100
Measurement system 3-lead technology.
Temperature range For the correct version, please feel free to contact us.
Materials Housing: aluminium, sensor: stainless steel-316. 
Dimensions Housing: – ,Sensor: As requested with order.
Process connection Housing suitable for wall mounting.
Connection cable Screw connection in the housing is supplied without cable.
IP-norm  IP-65 
(the cut away measuring section of the 149 air probe is not watertight).
Options 
(for supplement) 
  • Measurement system PT100 1/3 Din selection.
  • Measurement system PT100 1/5 Din selection.
  • Measurement system PT100 1/10 Din selection.

 
 

DOCUMENTATION

• Brochure
• Further information about dimensions, connection and cables is given on the Support pages.

ORDERING

The delivery of standard types from stocks and customer-specific versions can be within a few days. In view of the large number of version and options for orders you can contact our sales department tel. +31 50-501 37 45 or by email:
sales@rstechnics.nl

Posted on

PT100 / Thermocouple cables

icon-pt100-thermocouple-cables

icon-pt100-thermocouple-cables

An up-to-date overview with connection cables for PT100 and Thermocouple temperature sensors can be found in our cable booklet.
This contains the various cables, colour codes, connection sequence and specifications.

Click here to see the cable booklet.

Click here for a colour chart of the most commonly used Thermocouple connections.

Do you require more information or wish to receive the booklets by mail?
Click here to request documentation