Author: Luuk Aalders

Programmable universal transmitter

Analog output & 2 relais (Alarm contacts)
SIL 2 certified
Suitable for DIN-rail mounting
Input for RTD, TC, Ohm, potentiometer, mA en V
(program-display 4501 is optional)

DESCRIPTION

Universal transmitters are used as a solution for signal separation, conversion, scaling, amplification, surveillance and control. Universal with power supply and usability and therefore suitable for a wide variety of industrial signals. Universal transmitters are easily configured with a removable front display or via a PC. The removable display features scrolling help texts in seven languages, including English. The front display can also be used to copy the configuration to other units, process and display output values and gives access to a host of other advanced features.

DOCUMENTATION

• Brochure

ORDER

Delivery from stock of standard types and programmed according to your data.
In view of the large number of versions and options for ordering you can contact our sales department tel. 050-501 37 45 of per email: 
sales@rstechnics.nl

Programmable universal transmitter

Analog output
SIL 2 certified
Suitable for DIN-rail mounting
Input for RTD, TC, Ohm, potentiometer, mA en V
(program-display 4501 is optional)

DESCRIPTION

Universal transmitters are used as a solution for signal separation, conversion, scaling, amplification, surveillance and control. Universal with power supply and usability and therefore suitable for a wide variety of industrial signals. Universal transmitters are easily configured with a removable front display or via a PC. The removable display features scrolling help texts in seven languages, including English. The front display can also be used to copy the configuration to other units, process and display output values and gives access to a host of other advanced features.

DOCUMENTATION

• Brochure

ORDER

Delivery from stock of standard types and programmed according to your data.
In view of the large number of versions and options for ordering you can contact our sales department tel. 050-501 37 45 of per email: 
sales@rstechnics.nl

Universal display/programming front.
For the purpose of programming the 4000 and 9000 series.

DESCRIPTION

The right accessorie for the right application. For optimal operation of the products of PR Electronics there is a complete range available with the right accessories. Here you will find programming software and -adapters for the units to provide the right setting, connection possibilities for digital communication, but also CJC cold junction compensation terminals for each unit where thermocouples will be connected. In addition a variety of solutions are available to quickly and efficiently mount the modules and provide them with supply voltage.

DOCUMENTATION

• Brochure

ORDER

Delivery from stock of standard types and programmed according to your data. In view of the large number of versions and options for ordering you can contact our sales department tel. 050-501 37 45 of per email: 
sales@rstechnics.nl

Field mounted HART® temperature transmitter with display
Selectable red or white backlight
Ex d explosion proof / flame proof
HART 7 functionality whit HART 5 compatibility

Input: RTD, TC, Ohm, mV
Output: analog 4-20 mA

DESCRIPTION

Temperature head mounted transmitters built into a connection head of a temperature sensor are in essential the best possible sollution if process temperature measurement with conversion and separation of RTD or TC sensor signals to analog signals is desired. There are also versions available with HART® signal and suitable for connection to PROFIBUS® PA and FOUNDATION™ Fieldbus, or constructions suitable for DIN rail mounting.

The assortment features rapid response times, splitter functions, RTD cable compensation, automatic CJC, auto-calibration, sensor fault detection and full programmability.

For every thinkable temperature measurement we have always the best solution. The transmitters are delivered pre-programmed and according to the desired measurement range and measurement system.

DOCUMENTATION

• Brochure

ORDERING

Delivery from stock of standard types and programmed according to your data.
In view of the large number of versions and options for ordering you can contact our sales department tel. 050-501 37 45 of per email: 
sales@rstechnics.nl

2-wire programmable R/I transmitter
ATEX II 1 G, RTD EAC R approval

Input: 1-channel or 2-channels, RTD
Output: 4-20 mA

DESCRIPTION

Temperature head mounted transmitters built into a connection head of a temperature sensor are in essential the best possible sollution if process temperature measurement with conversion and separation of RTD or TC sensor signals to analog signals is desired. There are also versions available with HART® signal and suitable for connection to PROFIBUS® PA and FOUNDATION™ Fieldbus, or constructions suitable for DIN rail mounting.

The assortment features rapid response times, splitter functions, RTD cable compensation, automatic CJC, auto-calibration, sensor fault detection and full programmability.

For every thinkable temperature measurement we have always the best solution. The transmitters are delivered pre-programmed and according to the desired measurement range and measurement system.

DOCUMENTATION

• Brochure

ORDERING

Delivery from stock of standard types and programmed according to your data.
In view of the large number of versions and options for ordering you can contact our sales department tel. 050-501 37 45 of per email: 
sales@rstechnics.nl

2-wire programmable R/I transmitter

Input: 1-channel or 2 channels, RTD
Output: 4-20 mA

DESCRIPTION

Temperature head mounted transmitters built into a connection head of a temperature sensor are in essential the best possible sollution if process temperature measurement with conversion and separation of RTD or TC sensor signals to analog signals is desired. There are also versions available with HART® signal and suitable for connection to PROFIBUS® PA and FOUNDATION™ Fieldbus, or constructions suitable for DIN rail mounting.

The assortment features rapid response times, splitter functions, RTD cable compensation, automatic CJC, auto-calibration, sensor fault detection and full programmability.

For every thinkable temperature measurement we have always the best solution. The transmitters are delivered pre-programmed and according to the desired measurement range and measurement system.

DOCUMENTATION

• Brochure

ORDERING

Delivery from stock of standard types and programmed according to your data.
In view of the large number of versions and options for ordering you can contact our sales department tel. 050-501 37 45 of per email: 
sales@rstechnics.nl

2-wire PRetop transmitter HART® protocol
HART®, CSA+FM+ATEX II 1 G D, EAC R approval

Input: universal RTD / TC, galvanic isolation
Output: 4-20 mA

DESCRIPTION

Temperature head mounted transmitters built into a connection head of a temperature sensor are in essential the best possible sollution if process temperature measurement with conversion and separation of RTD or TC sensor signals to analog signals is desired. There are also versions available with HART® signal and suitable for connection to PROFIBUS® PA and FOUNDATION™ Fieldbus, or constructions suitable for DIN rail mounting.

The assortment features rapid response times, splitter functions, RTD cable compensation, automatic CJC, auto-calibration, sensor fault detection and full programmability.

For every thinkable temperature measurement we have always the best solution. The transmitters are delivered pre-programmed and according to the desired measurement range and measurement system.

DOCUMENTATION

• Brochure

ORDERING

Delivery from stock of standard types and programmed according to your data.
In view of the large number of versions and options for ordering you can contact our sales department tel. 050-501 37 45 of per email: 
sales@rstechnics.nl

2-wire PRetop transmitter HART® protocol

Input: universal RTD / TC, galvanic isolation
Output: 4-20 mA

DESCRIPTION

Temperature head mounted transmitters built into a connection head of a temperature sensor are in essential the best possible sollution if process temperature measurement with conversion and separation of RTD or TC sensor signals to analog signals is desired. There are also versions available with HART® signal and suitable for connection to PROFIBUS® PA and FOUNDATION™ Fieldbus, or constructions suitable for DIN rail mounting.

The assortment features rapid response times, splitter functions, RTD cable compensation, automatic CJC, auto-calibration, sensor fault detection and full programmability.

For every thinkable temperature measurement we have always the best solution. The transmitters are delivered pre-programmed and according to the desired measurement range and measurement system.

DOCUMENTATION

• Brochure

ORDERING

Delivery from stock of standard types and programmed according to your data.
In view of the large number of versions and options for ordering you can contact our sales department tel. 050-501 37 45 of per email: 
sales@rstechnics.nl

2-wire PRetop programmable head mounting transmitter
ATEX II 1 G D, EAC R approval

Input: TC, galvanic isolation
Output: 4-20 mA

DESCRIPTION

Temperature head mounted transmitters built into a connection head of a temperature sensor are in essential the best possible sollution if process temperature measurement with conversion and separation of RTD or TC sensor signals to analog signals is desired. There are also versions available with HART® signal and suitable for connection to PROFIBUS® PA and FOUNDATION™ Fieldbus, or constructions suitable for DIN rail mounting.

The assortment features rapid response times, splitter functions, RTD cable compensation, automatic CJC, auto-calibration, sensor fault detection and full programmability.

For every thinkable temperature measurement we have always the best solution. The transmitters are delivered pre-programmed and according to the desired measurement range and measurement system.

DOCUMENTATION

• Brochure

ORDERING

Delivery from stock of standard types and programmed according to your data.
In view of the large number of versions and options for ordering you can contact our sales department tel. 050-501 37 45 of per email: 
sales@rstechnics.nl

2-wire PRetop programmable head mounting transmitter

Input: TC, galvanic isolation
Output: 4-20 mA

DESCRIPTION

Temperature head mounted transmitters built into a connection head of a temperature sensor are in essential the best possible sollution if process temperature measurement with conversion and separation of RTD or TC sensor signals to analog signals is desired. There are also versions available with HART® signal and suitable for connection to PROFIBUS® PA and FOUNDATION™ Fieldbus, or constructions suitable for DIN rail mounting.

The assortment features rapid response times, splitter functions, RTD cable compensation, automatic CJC, auto-calibration, sensor fault detection and full programmability.

For every thinkable temperature measurement we have always the best solution. The transmitters are delivered pre-programmed and according to the desired measurement range and measurement system.

DOCUMENTATION

• Brochure

ORDERING

Delivery from stock of standard types and programmed according to your data.
In view of the large number of versions and options for ordering you can contact our sales department tel. 050-501 37 45 of per email: 
sales@rstechnics.nl