Author: Luuk Aalders

Posted on

156 – Cable sensor

156-cable-temperature sensor

156-cable-temperature sensor

Temperature sensor in standard cable element version without process connection.

DESCRIPTION

The 156 series of cable elements are insert probes with a fixed mounted connection cable. available in various standard diameters and cable types. As measurement system standard PT100 and various Thermocouples are possible, with also more specific recorders in PT200, PT500, PT1000, Ni100 and Ni1000. The cable sensors are suitable for all sorts of application in for example industry, greenhouses, ovens, climate control and machine construction. Connection cable possible in PVC, PUR, Silicon, PTFE or Glass silk for temperatures up to 600 °C. As option an anti-kink coil can be mounted on the cable outlet.

SPECIFICATIONS
Types 156 series: Cable sensor without process connection. 
Length, diameter, measurement system and connection cable as requested with order.
Possible applications
  • General industry.
  • Greenhouses.
  • Ovens.
  • Climate control.
  • Machine construction.
Measurement element PT1000, PT200, PT500, PT1000, Ni100, Ni1000,
Thermocouple J, K or T.
Measurement system Single or Duplex version in 2, 3 or 4-lead technology.
Temperature range See connection cables for possible temperature ranges. 
This is however very dependent on the chosen materials, connection cables and construction. 
For the right version you are of course welcome to contact us.
Materials Stainless steel-316.
Dimensions As requested with order. 
Standard diameters 1-15 mm, standard lengths 10-500 mm. 
Other sizes according to customer’s desired length and diameter.
Process connection Smooth insert for clamp/grip mounting, etc.
connection cable     materials     temperature range

  • PVC            max.  80 °C
  • PUR            max.  70 °C
  • Silicon         max. 180 °C
  • PTFE           max. 250 °C
  • Glass silk      max. 600 °C

Standard length 2 metres, indicate other lengths on ordering.

 
IP-norm  IP-65.
Options 
(for supplement) 
  • Connection connector as requested, M8, M12 or customer-specific.
  • Thermocouple connector Male or Female, small or large model.
  • Watertight version (not possible in combination with PTFE cable).
  • Measurement system PT100 1/3 Din selection.
  • Measurement system PT100 1/5 Din selection.
  • Measurement system PT100 1/10 Din selection.
  • Smart coil.
  • Potting box.
DOCUMENTATION

• Brochure
• Further information about dimensions, connection and cables is given on the Support pages.

ORDERING

The delivery of standard types from stocks and customer-specific versions can be within a few days. In view of the large number of versions and options for orders you can contact our sales department tel. +31 50-501 37 45 or by email:
sales@rstechnics.nl

Posted on

155 – Screw-in cable sensor

155-screw-in-temperature sensor

155-screw-in-temperature sensor

Temperature sensor in standard cable sensor version with process connection. Version, dimensions and process connection according to customer specifications to be determined; ask about the unlimited model possibilities!

DESCRIPTION

The 155 series of screw-in sensors are insert probes with a fixed mounted connection cable and a process connection to be determined according to customer specifications, available in various standard diameters and types of cables. As measurement system standard PT100 and various Thermocouples are possible, with also more specific recorders in PT200, PT500, PT1000, Ni100 and Ni1000. The cable sensors are suitable for all sorts of application in for example industry, greenhouses, ovens, climate control and machine construction. Connection cable possible in PVC, PUR, Silicon, PTFE or Glass silk for temperatures up to 600 °C. As option an anti-kink coil can be mounted on the cable outlet.

SPECIFICATIONS
Types 155 series: Cable sensor with process connection. 
Length, diameter, measurement system and connection cable as requested with order.
Possible applications
  • General industry.
  • Greenhouses.
  • Ovens.
  • Climate control.
  • Machine construction.
Measurement element PT100, PT200, PT500, PT1000, 
Ni100, Ni1000, 
Thermocouple J, K or T. 
Measurement system Single or Duplex version in 2, 3 or 4-lead technology.
Temperature range See connection cables for possible temperature ranges. 
This is however very dependent upon the chosen materials, connection cables and construction. 
For the right version you are of course welcome to contact us.
Materials Stainless steel-316.
Dimensions As requested with order. 
Standard diameters 1-15 mm, standard lengths 10-500 mm. 
Other sizes according to customer’s desired length and diameter .
Process connection Customer-specific as requested: Nipple or swivel in, for example, BSP, NPT or NW version.
Connection cable    materials    temperature range

  • PVC            max.   80 °C
  • PUR            max.   70 °C
  • Silicon         max. 180 °C
  • PTFE           max. 250 °C
  • Glass silk     max. 600 °C

Standard length 2 metres, indicate other lengths on ordering.
IP-norm  IP-68.
Options 
(for supplement) 
  • Connection connector as requested, M8, M12 or customer-specific.
  • Thermocouple connector Male or Female, small or large model.
  • Watertight version (not possible in combination with PTFE cable).
  • Measurement system PT100 1/3 Din selection.
  • Measurement system PT100 1/5 Din selection.
  • Measurement system PT100 1/10 Din selection.
  • Anti-kink coil.
  • Potting box.
DOCUMENTATION

• Brochure
• Further information about dimensions, connection and cables is given on the Support pages.

ORDERING

The delivery of standard types from stocks and customer-specific versions can be within a few days. In view of the large number of models and options for orders you can contact our sales department tel. +31 50-501 37 45 or by email:
sales@rstechnics.nl

Posted on

PR Electronics 3105 – Separator

PR 3105

PR 3105

Isolated converter 
Separator / converter
Isolated input / output

DESCRIPTION

Separators are used to separate all common process signals. You can think of electrical isolation, signal conversion, elimination of ground loops, scaling of process values, potential separation and noise filtering. Solutions with separators are applicable to the most common process signals, both passive (2-wire) as active (up to 4-wire), including analog, digital or HART®-signals. Our solutions are characterized by an extremely high galvanic isolation (up to 3.75 kVAC) and exceptional EMC immunity which translates into stable and reproducible process values in your process plant.

DOCUMENTATION

• Brochure

ORDER

Delivery from stock of standard types and programmed according to your data.
In view of the large number of versions and options for ordering you can contact our sales department tel. 050-501 37 45 or by email: 
sales@rstechnics.nl

Posted on

PR Electronics 3104 – Separator – ATEX

PR 3104

PR 3104

Isolated converter ATEX
Separator / converter
Isolated input / output

DESCRIPTION

Separators are used to separate all common process signals. You can think of electrical isolation, signal conversion, elimination of ground loops, scaling of process values, potential separation and noise filtering. Solutions with separators are applicable to the most common process signals, both passive (2-wire) as active (up to 4-wire), including analog, digital or HART®-signals. Our solutions are characterized by an extremely high galvanic isolation (up to 3.75 kVAC) and exceptional EMC immunity which translates into stable and reproducible process values in your process plant.

DOCUMENTATION

• Brochure

ORDER

Delivery from stock of standard types and programmed according to your data.
In view of the large number of versions and options for ordering you can contact our sales department tel. 050-501 37 45 or by email: 
sales@rstechnics.nl

Posted on

PR Electronics 9107A – Transparent driver – HART

PR 9107A

PR 9107A

HART® transparent repeater
24VDC supply via power rail or connectors
Fast response time
High active output load 725 Ohm / 20 mA
SIL2 full assessment and IEC 61508 certified

DESCRIPTION

Separators are used to separate all common process signals. You can think of electrical isolation, signal conversion, elimination of ground loops, scaling of process values, potential separation and noise filtering. Solutions with separators are applicable to the most common process signals, both passive (2-wire) as active (up to 4-wire), including analog, digital or HART®-signals. Our solutions are characterized by an extremely high galvanic isolation (up to 3.75 kVAC) and exceptional EMC immunity which translates into stable and reproducible process values in your process plant.

DOCUMENTATION

• Brochure

ORDER

Delivery from stock of standard types and programmed according to your data.
In view of the large number of versions and options for ordering you can contact our sales department tel. 050-501 37 45 or by email: 
sales@rstechnics.nl

Posted on

PR Electronics 9106A – Transparent repeater – HART

PR 9106A

PR 9106A

HART® transparent repeater
24VDC supply via power rail or connectors
Active and passive mA output
Splitter function – 1 in and 2 out
SIL2 / SIL3 full assessment and IEC 61508 certified

DESCRIPTION

Separators are used to separate all common process signals. You can think of electrical isolation, signal conversion, elimination of ground loops, scaling of process values, potential separation and noise filtering. Solutions with separators are applicable to the most common process signals, both passive (2-wire) as active (up to 4-wire), including analog, digital or HART®-signals. Our solutions are characterized by an extremely high galvanic isolation (up to 3.75 kVAC) and exceptional EMC immunity which translates into stable and reproducible process values in your process plant.

DOCUMENTATION

• Brochure

ORDER

Delivery from stock of standard types and programmed according to your data.
In view of the large number of versions and options for ordering you can contact our sales department tel. 050-501 37 45 or by email: 
sales@rstechnics.nl

Posted on

PR Electronics 5715B – Prog. LED display – 4 relais output

PR 5715B

PR 5715B

4 digit programmable LED display, 48x96mm

Input for mA, V, RTD, R, TC
Output: 4 relaiscontacts

DESCRIPTION

Displays or panel gauges are displaying the process values very simple. Simplicity which is reinforced by features include a universal power supply, easy programming, capabilities for linearization and offset, special input ranges and advanced relay settings. Expanded models have the possibility to control complex processes using analog outputs and a maximum of four potential free relays.

DOCUMENTATION

• Brochure

ORDER

Delivery from stock of standard types and programmed according to your data.
In view of the large number of versions and options for ordering you can contact our sales department tel. 050-501 37 45 or by email: 
sales@rstechnics.nl

Posted on

PR Electronics 5714B – Prog. LED display – 2 relais output

PR 5714B

PR 5714B

4 digit programmable LED display, 48x96mm

Input for mA, V, RTD, R, TC
Output: 2 relaiscontacts

DESCRIPTION

Displays or panel gauges are displaying the process values very simple. Simplicity which is reinforced by features include a universal power supply, easy programming, capabilities for linearization and offset, special input ranges and advanced relay settings. Expanded models have the possibility to control complex processes using analog outputs and a maximum of four potential free relays.

DOCUMENTATION

• Brochure

ORDER

Delivery from stock of standard types and programmed according to your data.
In view of the large number of versions and options for ordering you can contact our sales department tel. 050-501 37 45 or by email: 
sales@rstechnics.nl

Posted on

PR Electronics 5714A – Prog. LED display – Analog output

PR 5714A

PR 5714A

4 digit programmable LED display, 48x96mm

Input for mA, V, RTD, R, TC
Ouput: analog

DESCRIPTION

Displays or panel gauges are displaying the process values very simple. Simplicity which is reinforced by features include a universal power supply, easy programming, capabilities for linearization and offset, special input ranges and advanced relay settings. Expanded models have the possibility to control complex processes using analog outputs and a maximum of four potential free relays.

DOCUMENTATION

• Brochure

ORDER

Delivery from stock of standard types and programmed according to your data.
In view of the large number of versions and options for ordering you can contact our sales department tel. 050-501 37 45 or by email: 
sales@rstechnics.nl

Posted on

PR Electronics 9116A – Universal converter

PR 9116A

PR 9116A

Programmable universal converter

Supply for 2-wire transmitter
Active / passive mA output and relais output
SIL 2 certified
Suitable for DIN-rail mounting
Input for RTD, TC, Ohm, potentiometer, mA en V
(program-display 4501 is optional)

DESCRIPTION

Universal transmitters are used as a solution for signal separation, conversion, scaling, amplification, surveillance and control. Universal with power supply and usability and therefore suitable for a wide variety of industrial signals. Universal transmitters are easily configured with a removable front display or via a PC. The removable display features scrolling help texts in seven languages, including English. The front display can also be used to copy the configuration to other units, process and display output values and gives access to a host of other advanced features.

DOCUMENTATION

• Brochure

ORDER

Delivery from stock of standard types and programmed according to your data.
In view of the large number of versions and options for ordering you can contact our sales department tel. 050-501 37 45 of per email: 
sales@rstechnics.nl